330130-045-01-00本特利330101-12-40-10-02-05 Bently接近傳感器3300XL8mm
330130-045-01-00本特利330101-12-40-10-02-05 Bently接近傳感器3300XL8mm
產品詳情資料:
3500/25鍵相器模塊?
3500/25?改進的鍵相器模塊是一個半高度,2?通道模塊,用來為3500?框架中的監視器模塊提供鍵相位信號。此模塊接收來自電渦流傳感器或電磁式傳感器的輸入信號,並轉換此信號為數字鍵相位信號,該數字信號可指示何時轉軸上的鍵相位標記通過鍵相位探頭。每個鍵相模塊有2個輸入通道,3500?機械保護係統可安裝2個鍵相器模塊,接收4個鍵相位信號。??
注:??鍵相位信號是來自旋轉軸或齒輪的每轉一次或每轉多次的脈衝信號,提供的時間測量。允許3500?監測器模塊和外部故障診斷設備用來測量諸如1X?幅值和相位等向量參數。?
每個鍵相器模塊可接收2?個來自渦流傳感器或電磁傳感器的信號。輸入信號範圍為-0.8V到-21.0V(非絕緣I/O?模塊)和+5V到-11V(絕緣I/O?模塊)。模塊內可限幅,使信號不得超過此範圍。無源電磁傳感器要求軸轉速大於200rpm(3.3Hz)。在框架前面板上,通過同軸接頭,有2?個緩衝鍵相位輸出信號。2?個緩衝鍵相位輸出同樣可在框架背面,通過歐式接頭得到。前面板發光二極管?OK?指示燈:?可指示在鍵相器模塊內檢測到一個故障。
產品英文詳情資料:
3500/25 Keyphasor Module
The 3500/25 improved keyphasor module is a half height, 2-channel module used to provide keyphasing signals to the monitor modules in the 3500 rack. This module receives input signals from eddy current sensors or electromagnetic sensors and converts this signal into a digital keyphase signal, which can indicate when the keyphase marker on the shaft passes through the keyphase probe. Each keyphasor module has 2 input channels, and the 3500 mechanical protection system can install 2 keyphasor modules to receive 4 keyphasor signals. ??
Note: The keyphase signal is a pulse signal from a rotating shaft or gear that measures the time provided by one or multiple revolutions per revolution. Allow the 3500 monitor module and external fault diagnosis equipment to measure vector parameters such as 1X amplitude and phase. ?
Each keyphasor module can receive 2 signals from eddy current sensors or electromagnetic sensors. The input signal range is -0.8V to -21.0V (non insulated I/O modules) and+5V to -11V (insulated I/O modules). The amplitude can be limited within the module to ensure that the signal does not exceed this range. Passive electromagnetic sensors require a shaft speed greater than 200rpm (3.3Hz). On the front panel of the frame, there are 2 buffered key phase output signals through coaxial connectors. Two buffered key phase outputs can also be obtained on the back of the frame through European connectors. Front panel LED OK indicator: can indicate that a fault has been detected within the Keyphasor module.
免責聲明:
AMIKON我們銷售新產品和停產產品,獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用於識別目的,並不表示與任何權利持有人有任何關聯或授權。
TRICONEX | 8300A | WOODHEAD | SST-PB3-PCU |
TRICONEX | 4409 | SST | SST-PB3-CLX-RLL |
TRICONEX | 4351B | WOODHEAD | SST-PB3-CLX-RLL |
TRICONEX | 4329 | WOODHEAD | SST-PB3-CLX |
TRICONEX | 4211 | SST | SST-PB3-CLX |
TRICONEX | 4210 | WOODHEAD | SST-ESR2-CLX-RLL |
TRICONEX | 4119A | WOODHEAD | SST-DN3-PCI-2 DN3-PCI-1-E |
TRICONEX | 3806E | SST | 5136-DNP-CPCI |
TRICONEX | 3805E | PROSOFT | 5102-MCM4-DFCM4 |