DS200SLCCG3RGH渦輪機控制係統_廈門阿米控技術有限公司

產品標題:DS200SLCCG3RGH接口板渦輪機控制係統

型號： DS200SLCCG3RGH

品牌：GE

產品詳情資料：

t=時間（單位：分鐘）τ=冷卻時間常數（運行或停止）Ieq=等效電機加熱電流過載_pickup=過載拾取設定值（FLA熱/冷=熱/冷曲線比率的倍數）電機制造商可提供熱/冷電機的熱極限信息。如果編程了熱/冷曲線比率設定值，469熱模型將適應這些條件。該設定值規定了繼電器在電流水平低於過載拾取水平時所使用的熱容量水平。當電機以低於過載拾取水平的水平運行時，所用熱容量寄存器將上升或下降至基於平均相電流和熱/冷曲線比率設定值的值。所用熱容量將以每分鐘5%的固定速率上升，或根據運行冷卻時間常數下降。

產品英文詳情資料：

t = time in minutes τ = Cool Time Constant (running or stopped) Ieq = equivalent motor heating current overload_pickup= overload pickup setpoint as a multiple of FLA hot / cold = hot/cold curve ratio The motor manufacturer may provide thermal limit information for a hot/cold motor. The 469 thermal model adapts for these conditions if the HOT/COLD CURVE RATIO setpoint is programmed. This setpoint value dictates the level of thermal capacity used the relay will settle at for current levels below the OVERLOAD PICKUP LEVEL. When the motor is running at a level that is below the OVERLOAD PICKUP LEVEL, the THERMAL CAPACITY USED register will rise or fall to a value based on the average phase current and the HOT/COLD CURVE RATIO setpoint. The THERMAL CAPACITY USED will either rise at a fixed rate of 5% per minute or fall as dictated by the running cool time constant.

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用於識別目的，並不表示與任何權利持有人有任何關聯或授權。

ABB	Honeywell	Woodward
CS31 ECZ FPR3700001R0001	C7076A1015	9905-463
ICSI16E1 FPR3316101R1032	C7061F2001	5463-785
ICSK20F1 FPR3327101R1202	ACX633 51196655-100	5463-473
PP836A 3BSE042237R2	ACX631 51198947-100	5464-414
3BHB004744R0010 XVC517	942-M0A-2D-1G1-220S	5464-544
NGPS13C 3AUA0000042489	942-A4M-2D-K220S	5463-581
PP235 3BSC690102R2	900H03-0102	5464-013
DSTD110A YB161102-AM	900G32-0001	5464-211