DRL-II導熱係數測試儀（熱流法）_武漢格萊莫檢測設備有限公司

一、DRL-II導熱係數測試儀產品簡介
    熱流法導熱係數測定儀DRL-II型主要測試薄的熱導體、固體電絕緣材料、導熱樹脂、硅膠、氧化鈹瓷、氧化鋁瓷等材料的導熱係數，加圍框可檢測膠狀材料、粉狀材料。儀器參考標準：MIL-I-49456A（絕緣片材、導熱樹脂、熱導玻纖增強）；GB 5598-85（氧化鈹瓷導熱係數測定方法）；ASTM D5470-2006（薄的熱導性固體電絕緣材料傳熱性能的測試標準）等。廣泛應用在大中院校，科研單位，質檢部門和生產廠的材料分析檢測。
二、DRL-II導熱係數測試儀 技術指標
    ★試樣大小：Φ30mm ；
    ★試樣厚度：0.02-10mm ；
    ★溫度範圍：40-150℃，或室溫-300℃；
    ★帶有真空裝置，保證測試環境不受外界幹擾，真空度：-0.09MPa ；
    ★連接上位機實現計算機自動測試，並實現數據打印輸出。
    ★電源：220V/50HZ ；
    ★測試範圍：0.015～45W/m?k ；
    ★測試精度：3％

A, DRL-II thermal conductivity coefficient instrument product brief
Heat flow method, thermal conductivity coefficient tester type DRL-II mainly for testing thin thermal conductor, solid electrical insulating materials, resin, silica gel, beryllium oxide ceramics, alumina ceramic materials such as the thermal conductivity, and the frame can be detected in colloidal materials, powder materials. Reference standard: MIL-I-49456A ( insulating sheet, thermal conductivity, thermal conductivity of glass fiber reinforced resin ); GB 5598-85 ( BeO ceramic thermal conductivity method for determination of ASTM D5470-2006 ( thin ); the thermal conductivity of solid electrical insulating materials heat transfer performance testing standards ). Widely used in large and medium-sized institutions, scientific research units, quality inspection department and production plant material analysis testing.
In two, DRL-II thermal conductivity coefficient instrument technology index
★sample size:Φ 30mm;
★specimen thickness: 0.02-10mm;
★temperature range: 40-150℃, -300 ℃and room temperature;
★with vacuum device, ensure the test environment without outside interference, vacuum: -0.09MPa;
★connected to host computer to realize computer automatic testing, and realizes the data printout.
★power: 220V/50HZ;
★test range: 0.015 ～ 45W/m ?k;
★test accuracy: 3%