HBE-3000A電子布氏硬度計_武漢格萊莫檢測設備有限公司

武漢格萊莫檢測設備有限公司

電話：13545068882；027-86619889

傳真：027-86619889

網址：www.glmgs.com

http://www.glmgs.com/prodxx.asp?id=605

一、產品簡介
    HBE-3000A電子布氏硬度計適用於測定黑色金屬、有色金屬的布氏硬度。本機採用閉環式傳感器加載、電子控制係統，具備10級的試驗力。本機具有精度高、高重復性和穩定性，操作簡便等特點。適用範圍：布氏硬度採用的試驗力大，壓痕直經也大，適合具有大晶粒金屬材料的硬度測試，如: 鑄鐵，有色金屬及合金，各種退火、調質處理後的鋼材，特別是對於較軟的金屬，如純鋁、鉛、錫等。
二、技術指標
    ★布氏標尺：HBW2.5/62.5、HBW2.5/187.5、HBW5/125、HBW5/750、 HBW10/100、 HBW10/250、 HBW10/500、HBW10/1000、HBW10/1500、HBW10/3000
    ★試驗力：62.5kgf(612.9N)、100kgf (980.7N)、125kgf (1226N)、187.5kgf (1839N)、250kgf 250kgf (2452N)、500kgf (4903N)、750kgf (7355N)、1000kgf (8907N)、1500kgf 1500kgf (14710N)、3000kgf (29420N)
    ★小測量單位：0.005mm
    ★總放大倍數：20X
    ★保荷時間：5~60S
    ★儀器尺寸(長×寬×高)：550×210×750mm
    ★主機重量：；約125kg
    ★試件大高度：230mm
    ★電源：AC220V±5%，50~60Hz
    ★執行標準：GB/T231.2國家標準；JJG150檢定規程
    ★標準配件附件：測量顯微鏡一套、直經2.5、5、10mm硬質合金球壓頭、標準硬度塊（2）、，大平試臺、中平試臺、“V”型試臺、電源線

One, product introduction
HBE-3000A electronic Brinell hardness tester is applicable to determination of ferrous metal, non-ferrous metal Brinell hardness. This machine adopts closed loop sensor loading, electronic control system, with 10 level of test force. This machine has high accuracy, high repeatability and stability, simple operation and other characteristics. Scope of application: Brinell hardness test indentation by force, straight is large, suit with large grain hardness test, such as: cast iron, non-ferrous metals and alloys, various annealing, hardening and tempering steel, especially for soft metal, such as aluminum, lead, tin and other.
Two, technical indicators
★Brinell scale: HBW2.5/62.5, HBW2.5/187.5, HBW5/125, HBW5/750, HBW10/100, HBW10/250, HBW10/500, HBW10/1000, HBW10/1500, HBW10/3000
★test: 62.5kgf ( 612.9N ), 100kgf ( 980.7N ), 125kgf ( 1226N ), 187.5kgf ( 1839N ), 250kgf 250kgf ( 2452N ), 500kgf ( 4903N ), 750kgf ( 7355N ), 1000kgf ( 8907N ), 1500kgf 1500kgf ( 14710N ), 3000kgf ( 29420N )
The smallest unit of measurement: 0.005mm
Of the total magnification: 20X
★dwell time: 5~60S
★instrument dimensions ( length * width * height ) :550 × 210× 750mm
★host weight:; John 125kg
★specimen maximum height: 230mm
★power: AC220V ± 5%, 50~60Hz
★executive standard: GB/T231.2 JJG150 national standards; verification regulation
★standard accessories: measuring microscope set, straight after 2.5, 5, 10mm hard alloy ball indenter, standard hardness block ( 2), a large, flat bench, bench, in " V " type test bench, power line