HBS-3000數顯布氏硬度計_武漢格萊莫檢測設備有限公司

武漢格萊莫檢測設備有限公司

電話：13545068882；027-86619889

傳真：027-86619889

網址：www.glmgs.com

http://www.glmgs.com/prodxx.asp?id=606

一、產品簡介
    HBS-3000數顯布氏硬度計是新開發的，具有國內先進水平的新一代布氏硬度計。適用於黑色金屬，有色金屬的布氏硬度測定。本機採用電子自動加荷，計算機軟件編程，高倍率光學測量，光電傳感等係統。各項操作過程和試驗結果的數據均可在LTD大屏幕顯示，試驗結果的數據可通過打印機輸出。本機適用於各類生產加工企業、大專院校、科研機械的試驗室。
二、技術指標
    ★布氏標尺：HBW2.5/62.5、HBW2.5/187.5、HBW5/125、HBW5/750、 HBW10/100、 HBW10/250、 HBW10/500、HBW10/1000、HBW10/1500、HBW10/3000
    ★試驗力：62.5kgf(612.9N)、100kgf (980.7N)、125kgf (1226N)、187.5kgf (1839N)、250kgf 250kgf (2452N)、500kgf (4903N)、750kgf (7355N)、1000kgf (8907N)、1500kgf 1500kgf (14710N)、3000kgf (29420N)
    ★小測量單位：0.125μm
    ★保荷時間：5~60S
    ★儀器尺寸(長×寬×高)：550×210×750mm
    ★主機重量：約125kg
    ★試件大高度：230mm
    ★電源：AC220V±5%，50~60Hz
    ★執行標準：GB/T231.2國家標準；JJG150檢定規程
    ★標準配件附件：20X測微目鏡一只、直經2.5、5、10mm硬質合金球壓頭、標準硬度塊（2）、，大平試臺、中平試臺、“V”型試臺、電源線、打印機說明書、232接線一根

One, product introduction
HBS-3000 display Brinell hardness tester is a new development, with the domestic advanced level of a new generation of Brinell hardness tester. Applicable to black metal, nonferrous metal Brinell hardness measurement. This machine adopts electronic auto loading, computer software programming, high power optical measurement, a photoelectric sensor system. The operating process and test results of the data can be found in the LTD large screen display, test data can be output through the printer. This machine is applicable to all types of production and processing enterprises, universities, scientific research equipment laboratory.
Two, technical indicators
★Brinell scale: HBW2.5/62.5, HBW2.5/187.5, HBW5/125, HBW5/750, HBW10/100, HBW10/250, HBW10/500, HBW10/1000, HBW10/1500, HBW10/3000
★test: 62.5kgf ( 612.9N ), 100kgf ( 980.7N ), 125kgf ( 1226N ), 187.5kgf ( 1839N ), 250kgf 250kgf ( 2452N ), 500kgf ( 4903N ), 750kgf ( 7355N ), 1000kgf ( 8907N ), 1500kgf 1500kgf ( 14710N ), 3000kgf ( 29420N )
The smallest unit of measurement: 0.125 μ M
★dwell time: 5~60S
★instrument dimensions ( length * width * height ) :550 × 210× 750mm
★host weight: about 125kg
★specimen maximum height: 230mm
★power: AC220V ± 5%, 50~60Hz
★executive standard: GB/T231.2 JJG150 national standards; verification regulation
★standard accessories: 20X micrometer eyepiece a, straight after 2.5, 5, 10mm hard alloy ball indenter, standard hardness block ( 2), a large, flat bench, bench, in " V " type test bench, power line, manual, 232 connecting a printer