武漢格萊莫檢測設備有限公司
電話:13545068882;027-86619889
傳真:027-86619889
網址:www.glmgs.com
http://www.glmgs.com/prodxx.asp?id=588
一、產品簡介
LX邵氏C型硬度計是測定壓縮率為 50% 時應力為 0.5kg/c㎡ 以上的含有發泡濟制成的橡塑微孔材料硬度,也可用於類似硬度的其他材料。針式指示,讀數方便、準確、精度高;手持式設計,攜帶方便,可手持測量,也可安裝在配套的測試架上測試
二、技術指標
★刻度盤值:0 ∼ 100HA;
★壓針行程:2.5 mm;
★推薦測量範圍:10 ∼ 90HA;
★壓針頭部尺寸:SR 2.5 mm;
★重 量:0.5 kg。
一、產品簡介
One, product introduction
LX邵氏C型硬度計是測定壓縮率為 50% 時應力為 0.5kg/c㎡ 以上的含有發泡濟制成的橡塑微孔材料硬度,也可用於類似硬度的其他材料。針式指示,讀數方便、準確、精度高;手持式設計,攜帶方便,可手持測量,也可安裝在配套的測試架上測試
LX shore C hardness is measured compression rate of 50% when stress for 0.5kg/c ㎡above contains a foaming economy made of rubber microporous material hardness, and can also be used for other similar hardness of materials. Needle type indicator, reading is convenient, accurate, high precision; handheld design, easy to carry, can be a hand-held measurement, can also be mounted on a supporting test rack test
二、技術指標
Two, technical indicators
★刻度盤值:0 ∼ 100HA;
★dial value: 0∼ 100HA;
★壓針行程:2.5 mm;
★pressure stroke of the needle: 2.5 mm;
★推薦測量範圍:10 ∼ 90HA;
★recommend measuring range: 10∼ 90HA;
★壓針頭部尺寸:SR 2.5 mm;
★ press needle head size: SR 2.5 mm;
★重 量:0.5 kg。
★weight: 0.5 kg.