你好,歡迎來到世鋁網 [請登錄] [免費注冊]
世鋁網 鋁業設備
您當前的位置: 世鋁網 鋁業設備 凈化設備 順鋒SXT-1型水洗臺風機 普通會員

順鋒SXT-1型水洗臺風機

加入收藏 舉報
詳細信息

SF-SXT型水洗臺離心風機  Centrifugal Fan for Water Washing Table

風機特點:

  此風機為馬達與葉輪直接聯接式,結構緊湊且葉輪可隨馬達打開(開啟式,如圖所示),並開有清理門。此設計主要優勢是易於清理葉輪上所沾附的油漆,粉塵等物,本機型具有整體機型較小,風量大,壓力強,故障低,維護保養方便等特點,廣泛應用於各個行業,備受客戶青睞。

風機用途:

(1)噴涂設備中:無泵浦/水濂櫃噴漆臺上抽風及供風。

(2)廚房排煙用。

(3)各酒店,工廠,大廈之通風換氣。

風機選用注意事項:

(1)本風機如果是用於抽油漆時,請必需在使用前在機殼內部及葉輪上涂上黃油,以便定期清理油漆時方便清理。

(2)抽油漆及粉末時一般要在7-10天定期清理一次,並據實際使用情況加以調整。

(3)如果是顧客在使用過程中未及時清理或不完全清理油漆而產生負載燒壞電機或振動,則不在保質期之內。

(4)此風機不宜抽:特粘性油漆/UV漆

(5)、本機型一般常規為不帶機腳,不帶機腳的請選擇風機旋向(右旋或左旋),可根據實際需要加機腳選擇出口方向,或選擇方形風機。

(6)、風機選用時要注明使用溫度、使用場合,及風量、風壓要求,以便能準確報價。

具體參數及尺寸請聯係本公司索取!

Fan characteristics:

The fan is directly connected with the motor and impeller. The structure of the fan is compact and the impeller can be opened with the motor (open type, as shown in the figure), and the cleaning door is opened. The main advantage of this design is that it is easy to clean up the paint and dust on the impeller. This machine has the characteristics of small size, large air volume, strong pressure, low failure, easy maintenance and so on. It is widely used in various industries and is favored by customers.

Uses of fan:

(1) In spraying equipment: no pumping/spraying cabinet on the air pumping and supply.

(2) Kitchen smoke exhaust.

(3) Ventilation of hotels, factories and buildings.

Notes for fan selection:

(1) If the fan is used for painting, butter must be applied on the inner of the casing and impeller before use, so as to clean the paint regularly and conveniently.


(2) When drawing paint and powder, it should be cleaned regularly and thoroughly in 7-10 days, and adjusted according to the actual use.

(3) If the customer fails to clean the paint in time or incompletely in the course of using, and the load burns out the motor or vibrates, it is not within the shelf life.

(4) This fan should not be pumped: extra viscous paint/UV paint

(5) The general rule of this machine is that there is no machine foot. If there is no machine foot, please choose the direction of rotation of the fan (right or left). The outlet direction of the machine foot can be selected according to the actual needs, or the square fan can be selected.

(6) When selecting the fan, it is necessary to specify the use temperature, the use occasion, and the requirements of air volume and pressure, so as to be able to quote accurately.

Specific parameters and dimensions, please contact our company to obtain!


聯係方式
  • 聯係人: 陳應軍 先生
  • 職位: 總經理
  • 真: 0769-82528708
  • 電話: 0769-82528313
  • 手機: 13925557269
  • 址: 廣東省 東莞市 東莞市橋頭鎮蓮湖路石水口路段553號
還沒找到合適的產品?
  • 01
  • 快速發布求購信息
  • 下一步
  • 02
  • 試試以下相關搜索:
  • 03
  • 聯係cnal客服:
  • 致電: 0371-63388900
    馬上啟動您的快速採購通道!