?ACS800-04-210-3+D150+P901? 是 ABB 推出的一款工業變頻器
?ACS800-04-210-3+D150+P901? 是 ABB 推出的一款工業變頻器
?ACS800-04-210-3+D150+P901? 是 ABB 推出的一款工業變頻器
?ACS800-04-210-3+D150+P901? 是 ABB 推出的一款工業變頻器
?ACS800-04-210-3+D150+P901? 是 ABB 推出的一款工業變頻器
?ACS800-04-210-3+D150+P901? 是 ABB 推出的一款工業變頻器，專為大功率電機控制設計，適用於風機、水泵、壓縮機等高負載連續運行場景。以下是基於同類型號與技術資料整理的詳細技術參數：
?基礎型號：ACS800-04-210-3?
?係列標識（ACS800）?：ABB 標準變頻器平臺，支持直接轉矩控制（DTC），具備高動態響應和調速能力。
?結構類型（04）?：代表櫃式傳動模塊（Drive Module），適用於 ?160kW 及以上? 功率等級，便於集成於電氣櫃中，適合工業現場固定安裝。
?額定電流（210）?：輸出額定電流為 ?210A?，對應適配電機功率約為 ?160kW?（在標準工況下）。
?電壓等級（3）?：輸入電壓為 ?三相 AC 380–415V?，頻率 50/60Hz，屬於低壓變頻器範疇。
?附加功能模塊?
?D150?：內置 ?直流電抗器?（DC Reactor），用於抑制輸入側諧波電流，提升功率因數，減少對電網的幹擾，增強係統穩定性 。
?P901?：標配 ?中文控制盤（Control Panel）?，支持本地參數設置、運行狀態監控、故障診斷與報警查看，操作便捷 。
?控制方式?：採用 ABB 專利的 ?直接轉矩控制（DTC）技術?，實現毫秒級轉矩響應，無需編碼器即可控制電機轉速與轉矩。
?輸出性能?：
輸出頻率範圍：0–500Hz
過載能力：通常支持 150% 額定電流持續 60 秒（重載模式）
?通信接口?：
標配 Modbus RTU
可選 PROFIBUS、DeviceNet、Ethernet/IP 等現場總線協議
?保護功能?：
過流、過壓、欠壓、過熱保護
電機缺相、接地故障檢測
?防堵轉功能?（通過 P901 功能包實現）：自動識別負載異常並採取保護措施
?能效優化?：
支持 ?睡眠/喚醒功能?，根據負載需求自動啟停，降低空載能耗
內置 ?流量計算功能?，適用於泵與風機類應用，實現按需調節
?防護等級?：基本單元為 ?IP00?（需安裝於保護櫃內）；可選配 IP20 或更高防護等級櫃體
?冷卻方式?：強制風冷，內置冷卻風扇
?安裝方式?：櫃式安裝，支持落地或壁挂，支持左右出線設計，便於布線
?工作溫度?：-10°C 至 +40°C（超過需降額使用）
?海拔高度?： 1000m（更高海拔需降額）
水處理廠的大型水泵控制
鋼鐵廠的風機與軋機傳動
化工行業的壓縮機與攪拌設備
電力係統的冷卻風機調速
物料搬運係統中的傳送帶驅動
-----------------------------------------------------------------------------------
P0901XT 福克斯波羅FOXBORO
P0400YG FOXBORO
P0900WU FBM11/16 P0700KW FBM17C
P0960HA FOXBORO 福克斯波羅
P0972PP FOXBORO 福克斯波羅
FOXBORO 福克斯波羅 P0960HA
P0961FR FOXBORO 福克斯波羅
P0400YC FBM02 FOXBORO福克斯波羅
FBM201 FOXBORO福克斯波羅DCS FBM201 FBM201 FBM201
P0972AJ FOXBORO 福克斯波羅
DM900HT FBM24 DM900HT FBM24 福克斯波羅
AD194RY FOXBORO 福克斯波羅AD194RY AD194RY AD194RY
CM400YK FBM9 FOXBORO 福克斯波羅
CM400YM FBM11 FOXBORO 福克斯波羅
CM400YQ FBM14 FOXBORO福克斯波羅
CM902WL 福克斯波羅FOXBORO
DM400YT FBM17 FOXBORO 福克斯波羅
P0400DA FBM01 FOXBORO福克斯波羅
P0400DL-OE FOXBORO 福克斯波羅
P0400HH FBM1/43 FOXBORO 福克斯波羅
P0400YE FOXBORO 福克斯波羅
P0500RU FBM3A/33A FOXBORO 福克斯波羅
P0500RY FBM4/39/44 FOXBORO 福克斯波羅
P0700HE FBM6 FOXBORO 福克斯波羅
P0700HE FBM6 FOXBORO 福克斯波羅
P0800DC PIO-ISO/2Y FOXBORO 福克斯波羅
P0900WU FBM11/16 P0700KN FBM17C FOXBORO 福克斯波羅
P0902BP FBM24B/25B P0700AC FBM2 FOXBORO 福克斯波羅
P0903NU FOXBORO 福克斯波羅
P0903ZL I/A series FOXBORO 福克斯波羅 P0903ZL
P090ZE/B P090ZN-OA FOXBORO 福克斯波羅
P09110P-B FOXBORO 福克斯波羅
P0912CA 福克斯波羅FOXBORO
P0950CO-K P0800DG-K FOXBORO 福克斯波羅
P0960AH-0C FOXBORO 福克斯波羅
P0961BC CP40B FOXBORO 福克斯波羅
P0961BU/C FOXBORO 福克斯波羅
P0971WV FOXBORO 福克斯波羅
PO400VE FBM3A/33A FOXBORO 福克斯波羅PO400VE FBM3A/33A
P0901XT 福克斯波羅FOXBORO
P0400YG FOXBORO 福克斯波羅
FOXBORO P0400DA
-------------------------------------------------------------------------
ACS800-04-210-3+D150+P901 is a high-performance industrial frequency converter launched by ABB, designed specifically for high-power motor control, suitable for high load continuous operation scenarios such as fans, water pumps, compressors, etc. The following are detailed technical parameters based on similar models and technical data:
? Core parameter analysis
Basic model: ACS800-04-210-3
Series identification (ACS800): ABB standard frequency converter platform, supporting direct torque control (DTC), with high dynamic response and precise speed regulation capability.
Structure type (04): Represents a cabinet type drive module, suitable for power levels of 160kW and above, easy to integrate into electrical cabinets, and suitable for fixed installation in industrial sites.
Rated current (210): The output rated current is 210A, corresponding to a motor power of approximately 160kW (under standard operating conditions).
Voltage level (3): The input voltage is three-phase AC 380-415V, with a frequency of 50/60Hz, belonging to the category of low-voltage frequency converters.
Additional functional modules
D150: Built in DC Reactor, used to suppress input side harmonic currents, improve power factor, reduce interference with the power grid, and enhance system stability.
P901: Standard Chinese control panel, supporting local parameter settings, operation status monitoring, fault diagnosis, and alarm viewing, easy to operate.
?? Technical features and functional highlights
Control method: Adopting ABB's patented direct torque control (DTC) technology, it achieves millisecond level torque response and can accurately control motor speed and torque without the need for an encoder.
Output performance:
Output frequency range: 0-500Hz
Overload capacity: usually supports 150% rated current for 60 seconds (overload mode)
Communication interface:
Standard Modbus RTU
Optional fieldbus protocols such as PROFIBUS, DeviceNet, Ethernet/IP, etc
Protection function:
Protection against overcurrent, overvoltage, undervoltage, and overheating
Motor phase loss and grounding fault detection
Anti lock rotation function (implemented through P901 function package): automatically identifies abnormal load and takes protective measures
Energy efficiency optimization:
Support sleep/wake-up function, automatically start and stop according to load requirements, reduce no-load energy consumption
Built in flow calculation function, suitable for pump and fan applications, to achieve on-demand adjustment
? Installation and environmental requirements
Protection level: The basic unit is IP00 (to be installed inside the protective cabinet); Optional cabinet with IP20 or higher protection level
Cooling method: forced air cooling, built-in cooling fan
Installation method: Cabinet installation, supports floor or wall mounting, supports left and right outlet design, easy wiring
Working temperature: -10 ° C to+40 ° C (use with reduced rating if exceeded)
Altitude: 1000m (higher altitudes require derating)
? Typical application scenarios
Large scale water pump control in water treatment plants
Fan and rolling mill drive in steel plants
Compressors and mixing equipment in the chemical industry
Speed regulation of cooling fans in power systems
Conveyor belt drive in material handling system
豫公網安備41010502000017號 
