立式鋁合金淬火爐_湖州中科爐業科技有限公司

品牌：湖州中科爐業科技有限公司

產地：浙江省湖州市長興縣

立式淬火爐表面淬火只對工件的表面或部分表面進行熱處理，所以只改變表層的組織,而心部或其它部分的組織仍保留原來的低硬度、高塑性和高韌性的性能. 這樣工件截面上由於組織不同性能也就不同。表面淬火便於實現機械化、自動化，質量穩定，變形小，熱處理周期短，費用少，成本低。

立式淬火爐設備採用耐熱不銹鋼做風道,料架採用高速起升,3～6秒內進水池.爐蓋電動推桿升降,嚴格密封，使工件材料與外界空氣隔絕，在加熱、保溫過程中，爐內有高強對流風機，爐內形成強對流循環，促使爐溫均勻，爐內各點溫差可控制在1℃內，從而使退火材料獲得均勻一致的物理機械性能。

Vertical Aluminium Alloy quenching furnace

Surface quenching of this type furnace only heat treat the surface or part surface of the workpiece , so only change the surface tissue, while the inside and other parts still retain the original low hardness, high plasticity and high toughness.

Surface quenching is easy to achieve mechanization and automation. It is stable quality, small deformation, short heat treatment cycle, less expenses and low cost.

Vertical quenching furnace uses heat - resistant stainless steel for air duct, material rack is raised at high speed, only need 3-6 seconds to get into water channel. In the process of heating and heat preservation, there is a high strength convection fan in the furnace, and a strong convection circulation is formed in the furnace, which makes the furnace temperature uniform. The temperature difference of each point in the furnace can be controlled within 1℃, so that the anneal material can obtain uniform physical and mechanical properties.