9360RC模塊
9360RC模塊
9360RC模塊
靈活的串口轉WiFi網絡解決方案
支持802.11 b/g/n
支持無線客戶端模式，同時支持軟AP模式
內置完整的TCP/IP協議棧和Web服務器
支持兩根串口，高速率921.6Kbps
豐富的接口，支持USB2.0，SPI接口
支持256位AES數據加密傳輸
尺寸小巧24mm＊16.5mm
工業級寬溫：－40°C ∼＋85°C
產品5年保修
xPico? Wi-Fi?是一款上靈活的Wi-Fi?設備服務器，幫助您降低產品開發成本，縮短產品的推廣周期。
xPico Wi-Fi 針腳封裝與xPico係列產品一致，避免了產品更換升級而重新設計電路板，支持低功耗模式，支持同時Soft AP和Client模式，完整的IP協議棧和WLAN堆棧，豐富的軟件功能，提供五年質保服務。
強大的網絡解決方案
Lantronix推出的xPico Wi-Fi是一款高度集成，低功耗的網絡解決方案，可以解決無線局域網連接與SPI，USB，或串口的接口轉換問題。Lantronix的工業設備聯網服務器內置完整的IP協議棧能夠與遠程數據平臺無縫整合，簡化數據接口設計，提供強大的通訊能力。
同時AP和Client模式
xPico Wi-Fi提供先進的解決方案，提供所有的軟件功能，還包括一個重要的功能，同時AP和Client模式，這個功能可以在不中斷網絡連接的同時，提供AP接入點，訪問設備的數據。
靈活的解決方案
xPico係列產品使用相同的針腳定義封裝，無論是Wi-Fi還是以太網，為你的應用提供靈活的網絡解決方案。
更低的成本，更快的上市時間
作為一款上小的嵌入式設備聯網服務器，xPico Wi-Fi比芯片級解決方案成本更低，更快的將產品推廣到市場。“Zero host load”避免了與單片機連接需要重新編寫驅動程序，簡單快速，幾乎不需要編寫一行代碼，這將大大降低開發成本和上市時間。xPico Wi-Fi符合FCC Class B，UL、 EN EMC和認證。
規格
> 無線局域網端口
IEEE 802.11 b/g 和 IEEE 802.11n (single stream)
WLAN端口 (2.4 GHz only)
IEEE 802.11 d/h/i/j/k/w/r
支持WPS 2.0
支持u.FL天線接口
> 串口
2個串口，CMOS (3.3V, 5V tolerant)
300 到 921.6 Kbps
流控： XON/XOFF, RTS/CTS (串口1支持)
Lantronix tunneling application
ModBus TCP, Modbus ASCII, Modbus RTU
> 主要接口
雙串口, SPI, USB 2.0 (device)
8 GPIO
> 網絡協議
TCP/IP, UDP/IP, DHCP, ARP, ICMP, DHCP, Auto-IP,
DNS, SNMPv1, TFTP
> 網絡連接功能
軟AP模式下提供DHCP服務
Lantronix SmartRoam?持續跟蹤範圍內的無線信號強度, 採用預認證機制，自動過渡到下個無線AP而不產生延遲
快速連接：動態配置，方便快速的連接到接入點
xPico係列產品:
xPico
芯片級網絡解決方案，將您的設備通過以太網連接到網絡。
xPico IAP
芯片級網絡解決方案，將工業生產中的modbus設備連接到以太網。
> 管理和配置
登陸WEB頁面
CLI (Serial Monitor Port), Telnet
XML導入 和導出 (XCR)
固件升級 (OTA)
> 認證
支持IEEE 802.11i – WPA-Personal, WPA2-Personal
256-bit AES加密技術
> 硬件架構
ARM Cortex M3 class processor with on-chip Flash and
SRAM
1MB Flash and 128 KB SRAM
SPI Flash stores
> 軟件
基於 Windows DeviceInstaller?
基於 Windows Com Port Redirector
> 供電
輸入電壓: 3.3VDC
低功耗模式 待機狀態，20μA
> 物理接口
40-pin Board-to-Board SMT Connector
> 環境
工作溫度: –40° to +85° C
存儲溫度 : –40° to +85° C
相對濕度: 0% to 90%無凝露
> 認證
FCC Class B, UL and EN EMC
> 封裝
尺寸: 24mm (L) x 16.5mm (W) x 5.64mm (H)
重量: 2.5g
> 質保
5-Year
咨詢熱線：18150695049
誠信經營，質量為首，誠信至上，鼎晟達竭誠為您服務
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~`
漳州鼎晟達自動化設備有限公司
聯係人：藍經理（銷售經理）
手機 ：18150695049(微信同步）
QQ ：2880842794
郵箱 ：2880842794@qq.com
傳真 ：0596-3119658（請備注林工收）
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*所有備件的質保期均為1年，經過專業測試認證。
*如果您需要訂購產品超過1件，請與我們聯係，我們可以為您提供折扣。
*我們僅採用快遞方式遞送備件。（順豐）
*如果您發現其他供貨商為相同產品提供更為低廉的價格，我們也願意參照其價格向您提供進一步的折扣。如果還有其他任何問題，請隨時與我們聯係。
*請讓我們知道您有任何，備品，備件，的需要，我們可以給您進一步的援助，我們等候您的詢盤。
【主營產品】
1：Invensys Foxboro（福克斯波羅）：I/A Series係統，FBM（現場輸入/輸出模塊）順序控制、梯形邏輯控制、事故追憶處理、數模轉換、輸入/輸出信號處理、數據通信及處理等。
2：Invensys Triconex: 冗餘容錯控制係統、基於三重模件冗餘（TMR）結構的現代化的容錯控制器。
3：Westinghouse（西屋）： OVATION係統、WDPF係統、WEStation係統備件。
4：Rockwell Allen-Bradley: Reliance瑞恩、SLC500/1747/1746、MicroLogix/1761/1763/1762/1766/1764、CompactLogix/1769/1768、Logix5000/1756/1789/1794/1760/1788、PLC-5/1771/1785等。
5：Schneider Modicon（施耐德莫迪康）：Quantum 140係列處理器、控制卡、電源模塊等。
6：ABB：工業機器人備件DSQC係列、Bailey INFI 90等。
7：Siemens(西門子)：Siemens MOORE， Siemens Simatic C1，Siemens數控係統等。
8：Motorola（摩托羅拉）：MVME 162、MVME 167、MVME1772、MVME177等係列。
9：XYCOM：I/O 、VME板和處理器等。
10：GE FANUC(GE發那科)：模塊、卡件、驅動器等各類備件。
11：Yaskawa（安川）：伺服控制器、伺服馬達、伺服驅動器。
12：Bosch Rexroth（博世力士樂）：Indramat，I/O模塊,PLC控制器,驅動模塊等。
13：Woodward（伍德沃德）：SPC閥位控制器、PEAK150數字控制器。
14:工業機器人係統備件。
Antastelement 40mm f徂rtastsystem TT 140 from Heidenhain
Antastelement 25 mm f徂rtastsystem TT 140 from Heidenhain
Collet Chuck mk1 m6 er25 Kit e.g. for lid Milling Machine
Collet Chuck Cylindrical er25, d20, l100 Set
Connection cable id. No. 310125-06 for Heidenhain Scale 6m
Connection Cable id.nr.633608-12 Heidenhain Scale
Short Drill Chuck mk2 d1-13 Lids Milling Machine
Short Drill Chuck mk2 m10 d1-13 Lids Milling Machine
Collet Chuck din69871 er25 e.g for Deckel Milling Machine
Multifix Blank a d35/100 NEW for Lathe
Pinole mk4 s20x2 NEW for Deckel Milling Machine fp1
Grinding Vise With Clamps, Jaw Width 100mm NEW
Extension CABLE Heidenhain Scale NEW 9p. 8 M d6
Extension CABLE Heidenhain Scale ?6 NEW 9p. 10m
4 machine feet 150x150, m24x150 NEW MILLING MACHINE/LATHE
Swing Arm for Heidenhain VRZ counters
Connection cable id. No. 369129-06 by HEIDENHAIN
Collet Set Hex 355e 4,5,6,, 8,10mm e.g. for Deckel Milling Machine.
Collet Set Hex 355e 4,5,6,, 8,10mm e.g. for Deckel Milling Machine
Extension CABLE Heidenhain Scale NEW 9p. 6 M d8
X-Bellows for lid fp3l/2lb Milling Machine
Collet Chuck mk2 m10 er25 Kit e.g. for lid Milling Machine
Collet Chuck mk2 m10 er32 Kit e.g. for lid Milling Machine
Collet Chuck mk4 m16 er25 Lids Milling Machine
Collet Chuck din2080 er40 with 7 Collets for Deckel Milling Machine
Short Drill Chuck mk3 d1-13 Lids Milling Machine
5 Surface Chuck sk40 din2080 e.g. for Deckel Milling Machine
Dollies + Counter Bearing Gebr. for lid fp1 manufactured 66-77 Milling Machine
Milling Pin Long sk40 d16 din69871 e.g Lid Milling Machine
Milling Pin Long sk40 d27 DIN 2080 e.g. for Deckel Milling Machine
Milling Pin Long sk40 d40 s20x2 NEW for Deckel Milling Machine
Milling Pin Long sk40 d22 DIN 2080 e.g Lid Milling Machine
Milling Pin Long sk40 d32 s20x2 NEW for Deckel Milling Machine.
Milling Pin Long sk40 d27 s20x2 NEW F. Deckel Milling Machine
Milling Pin Long sk40 d1" (25,4mm) MINT CONDITION din69871 l300
Milling Pin Long sk40 d32 DIN 2080 for lid Milling Machine
Extension CABLE Heidenhain Scale NEW 9p. 5m d6
Connection cable id. No. 310121-03 for Heidenhain Scale
10 Suit Bolt between solution, DIN 2080 for Deckel Milling Machine
4 kegelreduzierh徂lsen sk40 s20x2 Lid Milling Machine
Collet Chuck din69871 er40 e.g Lid Milling Machine
User Manual Kit Lid fp2a/3a/4a Contour 3
Collet Chuck mk1 m6 er32 Set
4 machine feet 150x150, m20x100 NEW MILLING MACHINE/LATHE
Counter Bearing for lid fp1 with m16 Milling Machine
Coarse Scale Y axis for lid fp2 milling machine until 1977
Short Drill Chuck sk30 69871 d1-13
Coarse Scale Y axis for lid fp2 milling machine until 1966
Abstreifblech fp2/fp3 Active Z axis for lid Milling Machine
Extension CABLE Heidenhain Scale NEW 9p. 6 M d6
Companies Shield for lid fp4m, fp4mk Milling Machine
4 machine feet 150x150, m20x120 NEW MILLING MACHINE/LATHE
Step clamps 12mm 190 - 250 NEW LIDS Milling Machine
Collet Set er32 d3-20, RL. Max. 8μm, e.g. for lid Milling Machine
Direct Collet Set mk1 1-8mm NEW e.g. for lid Milling Machine
Collet Chuck sk30 din69871 er25 Set
Connection Cable Heidenhain Scale MS NEW 9p. for ls106 3m
Rotary Encoder ROD 420 -1000 in exchange (Exchange Service) from Heidenhain
Rotary Encoder ROD 420 -2000 in exchange (Exchange Service) from Heidenhain
Extension CABLE Heidenhain Scale NEW 12p. 3m
Connection cable id. No. 368605-03 for Heidenhain Scale
Connection cable id. No. 332115-10 for Heidenhain Scale
Multifix Rotary Steel Holder C 32/150 NEW for Lathe
Collet Chuck mk5 m20 er50 with 5 Collets d30-34
Collet Set oz415 between sizes d1, 5-15,5
Three jaw chuck d80mm with 5c (385e) SEALED
Part Head Tip sk40 s20x2 for lid s1 and s11
Drill Chuck sk40 69871 d0-8 for lid Milling Machine
Step clamps 16mm 130 - 210 NEW LIDS Milling Machine
User Manual Kit Lid fp2a/3a/4a Contour 3.
Extension CABLE 309774-06 Heidenhain Scale NEW 9p. 6 M
Connection cable id. No. 298430-06 for Heidenhain Scale
3 Combi Clip - on Mandrels NEW sk40 s20x2 e.g. for Deckel Milling Machine
MULTIFIX boring bar holder BJ 40 new for lathes
Collet Chuck sk40 din2080 er25 Set RL. Max 8μm e.g. F. Deckel Milling Machine
X-Bellows for Maho mh300 Milling Machine
Connection cable id. No. 558461-02 for Heidenhain Scale
Collet Set, er32 d3 - 20mm
Collet Set er32 d3 - 20mm.
Collet Set er32. d3 - 20mm
Z-Axis Spindle Nut Gebr. for lid fp4m/MK Milling Machine
Connection Cable NEW 15m id.nr.335074 -- 15 of Heidenhain Scale
Abstreifblech fp2lb, fp3l Z axis for lid Milling Machine
Connection Cable Heidenhain Scale NEW 12p.7m
Connection Cable Heidenhain Scale MS NEW 9p. on 303,406 ST 3m
Cylindrical roller bearings NN 3008 Gardens
Scrapers Complete Set Lid Milling Machine fp3l Active
Collet Chuck mk3 m12 OZ 415 E Set
Short Drill Chuck HSK 63 d1-13 Lids Milling Machine
Bung sk40 NEW with s20x2 for lid Milling Machine
Set Test Pins 36 pieces d7, 75 - 8,10mm 0,01mm Twist
4 machine feet ?160 h41 m16x150 Green New Milling Machine/Lathe
Y-Bellows 2700-4315 for lid fp4 Milling Machine
Step clamps 16mm 0 - 45 NEW LIDS Milling Machine
Step clamps 16mm 15 - 45 NEW LIDS Milling Machine
Scrapers COMPLETE SET FOR LID Milling Machine fp3nc/fp3a
Z-Scrapers-Conversion Kit for Deckel Milling Machine fp1
4 machine feet ?160 m24x150 Grey New Milling Machine/Lathe
Collet Chuck er25 Zylindr. Shaft d40, l100 Set
4 machine feet ?160 m16x100 Yellow New Milling Machine/Lathe
Collet Set er32 d1 - 20mm,
Collet Set er32 d1 - 20mm Lids Milling Machine
Collet Set er32 d1 - 20mm Lids Milling Machine
Collet Chuck sk30 DIN 2080 with er25 Collet Set RL. Max 8μm
Connection cable id. No. 310196-10 for Heidenhain Scale
Connection Cable ID. NR. 617765-nz for Heidenhain Scale
Y bellows fp4m/4mk for Deckel Milling Machine
Drill Chuck sk50 din69871 b16 d0, 2-16 e.g. for Deckel Milling Machine
Milling Pin Long sk30 d13 DIN 2080
Milling Pin Long sk30 d22 DIN 2080
Connection cable id. No. 384010-01 for Heidenhain Scale
Collet Chuck Cylindrical er25, d25, l100 Set
Milling Pin Long mk4 d22 s20x2 NEW for Deckel Milling Machine
Collet Chuck Cylindrical Mini er20 d20, l100 Set
4 machine feet ?160 m20x120 Grey New Milling Machine/Lathe
Milling Pin Long mk4 d27 NEW s20x2 for lid Milling Machine
Y-Scrapers 2001-490 for lid Milling Machine fp2 approx age 1966
Collet Chuck din69871 er16 Set 1-12 Wood Box e.g. F. Deckel Milling Machine
Multifix Drill Rod Holder CJ 50-160 Gebr. for lathes
Shape Plates holder for lid g1l
Y-Scrapers 2202-505 for lid Milling Machine fp2 approx up to 1966
Thread Cutting-Quick Change Chuck sk40 s20x2 Size 2 e.g. F. Deckel Milling Machi...
Drill Chuck sk50 din2080 b16 d1-16 eg for Deckel Milling Machine
Step clamps 12mm 0 - 45 NEW LIDS Milling Machine
Collet Set er32 d3-20 in Wooden Box RL. Max. 8μm, Lids Milling Machine
Collet Chuck d3/16 inch l36 NEW for Cover kf12/2
Connection Cable Heidenhain Scale NEW 12p.5m
Cover fp1 2171 Lid for Milling Machine
Milling Pin Long sk40 s20x2 d1 1/2" F. Deckel Milling Machine
Connection Cable Heidenhain Scale NEW 17p. - 9 M 369 124 - 09
Collet Chuck mk4 s20x2 er32 with 6 Collets for Deckel Milling Machine
Collet Chuck Cylindrical Mini er8 d12, l95 Set
3 kegelreduzierh徂lsen mk4-3, 4-2, 4-1 s20x2 e.g. for Deckel Milling Machine
Collet Chuck d1/2 inch l45 NEW for Cover kf12/2
X-Bellows fp2 for Deckel Milling Machine (x 500mm)
Connection cable id. No. 310122-06 for Heidenhain Scale
10 Suit Bolt s20x2 to 5/8-11 inch NEW e.g. for Deckel Milling Machine
10 Suit Bolt s20x2 to 5/8-11 inch NEW e.g. for Deckel Milling Machine.
Between Sleeve sk50 din2080 to sk40
Parallel Bars Set 150x10 mm 12 Set e.g. for lid Milling Machine
Between Sleeve sk50 69871 on sk40
X-Bellows for lid FP 3a 2206 Milling Machine
Collet Set Square 5c 2,4,6,8,10,12,16,18 MM
Connection cable id. No. 266655-04 for Heidenhain Scale
Pinole sk40 s20x2 MINT for lid Milling Machine fp2 2213-279
Parallel Bars Set 150x8 mm 14 Set e.g. for lid Milling Machine
Y-Bellows for lid fp3nc Milling Machine
3 Combi Clip - on Arbors d16-27 sk40 din69871 eg for Deckel Milling Machine
Thread Cutting-Quick-change chuck Gebr. sk50 m8-m20 Size 2
Connection cable id. No. 545547-09 for Heidenhain Scale
Connection cable id. No. 310125-04 for Heidenhain Scale
Connection Cable Heidenhain Scale NEW 9p.3m
Machine Lamp 24 V Gebr. e.g. for lid Milling Machine
Step clamps 12mm 120 -195 Gebr. Lids Milling Machine
Collet Chuck sk40 s20x2 er20 Set RL. Max 8μm z.b.f. Lid Milling Machine
Extension CABLE Heidenhain Scale NEW 9p. 3m d8
Thread Cutting-Quick-change chuck Cylindrical d20 Size 1 m3-m14
Connection cable id. No. 533631-09 for Heidenhain Scale
Extension CABLE Heidenhain Scale NEW 9p. 4m d6
3 Combi Clip - on Mandrels d16, 22,27 sk40 2080 e.g. for Deckel Milling Machine
Collet Set Square 355e 4,6,8,10,12mm e.g. for Deckel Milling Machine
Collet Set Square 355e 4,6,8,10,12mm e.g. for Deckel Milling Machine.
Collet Chuck Cylindrical er11 d20, l100 Set
Collet Set er32 d3-20mm RL. Max 8μm e.g. for Deckel Milling Machine
Connection cable id. No. 310740-06 for Heidenhain Scale
Extension CABLE Heidenhain Scale MS NEW 9p. 2m
Dividing head with tailstock for 5c Collets
Collet Set Hex 5c 4,6,8,10,12,16,20 MM
Milling Pin Long sk40 d16 l250 DIN 2080 e.g for Deckel Milling Machine
Coarse Scale X-axis for lid FPM, fp4mk Milling Machine
Collet Chuck 1/8" NEW l36 mm for Cover kf12/2
Y-Axis Spindle Nut for lid LK koordnatenschleifm.
Extension cable id. No. 246662-57 for Heidenhain Scale 9p. 4m d8
Collet Chuck mk1 m6 er11 Set
Parallel Bars Set 150x10 mm 14 Set Gebr. e.g. for lid Milling Machine
Collet recording mk4 NEW for lid Milling Machine
Collet Chuck Cylindrical Mini er11 d16, l100 Set
Multifix Drilling Steel Holder b30/130 NEW for Lathe
Dial Indicator for UNIVERSAL TABLE 2038 in exchange (Exchange) for Deckel Millin...
Collet Chuck mk4 m16 OZ 462 E with 7 Collets
Milling Pin Long sk40 d16 s20x2 for lid Milling Machine
Collet recording mk4 NEW for lid Milling Machine
X-Bellows New For Lid fp2nc - 2a Milling Machine
Bellows Center for lid gk12/gk21 Engraving Machine
Multifix Drilling Steel Holder bh32/130 NEW for Lathe
Y bellows until manufactured 77 for lid fp1 Milling Machine
Collet Chuck Cylindrical Mini er11 d20, l100 Set
Collet Chuck mk2 m10 er11 Set
Collet Chuck sk30 DIN 2080 oz462 with 7 Collets
Chuck mk1 1/4" inch for centricator C III e.g. for lid fr?smaschin
Chuck mk4 for centricator C III 5/8" inch
Step clamps 12mm 135 - 195 Mint Lids Milling Machine
4 machine feet ?120 m16x120 NEW MILLING MACHINE/LATHE
Collet Chuck s20x2 OZ 462 7-Pliers, e.g. for lid Milling Machine
Milling Pin Long sk40 d32 DIN 2080 e.g. for Deckel Milling Machine
3 Combi Clip - on Arbors sk40 din2080 d16, 22,27 e.g. for Deckel Milling Machine
3 Combi Clip - on Arbors sk40 din2080 d22, 27,32 e.g. for Deckel Milling Machine
Collet Chuck sk40 din2080 er25 Kit e.g. for lid Milling Machine
Collet Chuck sk40 din69871 er20 Set RL. Max 8μm z.b.f. Lid Milling Machine
Collet Set er32 d3 - 20mm
Collet Set er32 d3 - 20mm e.g. for lid Milling Machine
Collet Set er32 d3 - 20mm e.g. for lid Milling Machine,
Collet Set er32 d3 - 20mm e.g. for lid Milling machine.
Collet Set er32 d3 - 20mm e.g. for lid Milling machine.
Collet Set er32 d3 - 20mm
Collet Set er32 d3 - 20mm.
Shock Chisel Length 150 mm, for lid fp1/2/3 Milling Machine
Collet Chuck mk4 m16 OZ 462 E with 7 Collets
4 machine feet m24x150 NEW MILLING MACHINE/LATHE
Connection Cable Heidenhain Scale NEW 9p.3m.
Z-Bellows Plate for macmon m200 Milling Machine
Extension CABLE Heidenhain Scale NEW 9p. 2m d8
Y-Axis Spindle Nut inch for lid fp1 Milling Machine
Bellows Gebr. for lid LK Vertical Guide Bottom 2600-126
Y-Axis Spindle Nut fp2/fp2lb/fp3/fp3l from bj1967 for lid Milling Machine
Short Drill Chuck Gebr. sk40 din69871 d2, 5-16 e.g. for Deckel Milling Machine
Connection cable id. No. 310123-03 for Heidenhain Scale
Extension CABLE Gebr. ID. No. 262006-163 Heidenhain Scale NEW 9p. 10 M
Abstreifblech fp3 Z axis for lid Milling Machine
Collet Set er32 d3 - 20mm in Wooden Box e.g. for lid Milling Machine
Y-Axis Spindle Nut inch for lid fp1 Milling Machine
Shield for main and Feed Gear NEW for macmon alg200 Milling Machine
Gage Pin t03 NEW from Heidenhain
Extension CABLE Heidenhain Scale MS 9p. 5 M
Multifix Drilling Steel Holder C 50/160 for Lathe
Bearing Flange for the Y-Spindle Nut NEW LID fp2, fp3, fp3l Milling Machine
Chamfer 45 ° d16mm 2 Flute 7 NEW Turning Plates
Measurement Table Mitotoyo d58mm h100mm MINT CONDITION
Extension CABLE 246510-05 Gebr. Heidenhain 5m
Gage Pin t12 NEW from Heidenhain
Gage Pin t06 NEW from Heidenhain
Gage Pin t05 NEW from Heidenhain
Gage Pin t11 NEW from Heidenhain
Gage Pin t10 NEW from Heidenhain
Gage Pin t09 NEW from Heidenhain
Gage Pin t08 NEW from Heidenhain
Connection cable id. No. 310199-08 for Heidenhain Scale
Collet Chuck din2080 oz462 NEW e.g. for lid Milling Machine
Y-Axis Spindle Nut Up manufactured 82 for lid fp1 Milling Machine
Y-Axis Spindle Nut inch F. Deckel fp2/3/3l fr?sm.
Y bellows Gebr. Milling Head for lid fp3/3l Milling Machine
Hex Wheel Ring 1 MM NEW e.g. for lid Milling machine.
Y-Axis Spindle Nut Up manufactured 67 for lid fp2 Milling Machine
Parallel Bars Set 120x10 mm 12 Set e.g. for lid Milling Machine
Collet Set er32 d3 - 20mm e.g. for lid Milling Machine
Bellows right for lid gk12/gk21 Engraving Machine
Extension CABLE Heidenhain Scale NEW 9p. 3m d6
Connection Cable Heidenhain Scale 10m NEW 9p. on St.
Anreisstift Momentary sk40 s20x2 Gebr. e.g. for lid Milling Machine
Direct Collet Set mk3 d3-18 e.g. for Deckel Milling Machine
X-Bellows for lid fp2/3 Active Milling Machine
Connection cable id. No. 310127-06 for Heidenhain Scale
Collet Chuck mk2 m10 OZ 462 E with 7 Punches
Star Handle 10mm Hex e.g. for lid Milling Machine
Between Sleeve sk40-mk4 NEW e.g. F. Deckel Milling Machine
Connection cable id. No. 266657-03 for Heidenhain Scale
Operators Manual Lid Milling Machine fp2/3/4 NC SINUMERIK 3m
Star Handle 12mm Interior Four Sided e.g. for Deckel Milling Machine
Cutting Disc d100x1 d151 for lid s0, s0e, s1 and s11.
Collet Chuck s20x2 OZ 467 Lids Milling Machine
Connection cable id. No. 249240-06 for Heidenhain Scale
Collet Set er32 d3-20mm RL. Max 8μm e.g. for Deckel Milling Machine.
Collet Set. er32 d3 - 20mm
Connection cable id. No. 310196-05 for Heidenhain Scale
Bellow left for lid gk12/gk21 Engraving Machine
Pinole sk40 Gebr. for lid Milling Machine fp3
Shock Chisel Length 110 mm, for lid fp1/2/3 Milling Machine
Clamping Stairs Set 5 - 68mm b30mm e.g. for Deckel Milling Machine
Spring Cap Gebr. for lid Milling Machine fp1/2
Between Sleeve sk40-mk4 NEW e.g. for lid Milling Machine
Spring Cap Gebr. for lid Milling Machine fp3/3l
Precision Collet Set er20 d3-13, RL. Max. 5μm, e.g. for lid Milling Machine
Milling Pin Long sk40 d16 s20x2 for lid Milling machine.
Collet Chuck mk3 m12 er20 Set
Connection Cable Heidenhain Scale NEW 12p.3m
Spring 2713-1283 28mm for lid Milling Machine
Connection cable id. No. 545547-06 for Heidenhain Scale
Collet recording sk40 Gebr. for lid Milling Machine
Spreader Mandrel mk3 d24, 5-29 mm e.g. For Deckel Milling Machine
Bellows Plate for the Z-Bellows fp2 manufactured 66-77 Lid Milling Machine
Multifix Rotary Steel Holder CD 40/170 Gebr. for Lathe
Connection Cable Heidenhain Scale MS NEW 9p. at soldering. 9m
Test Mandrel mk4 NEW.
Milling Pin Long mk4 D 1"
Collet Chuck d12 l36 mm NEW For Cover kf12/2
Collet Chuck din2080 oz467 e.g Lid Milling Machine
Test Mandrel mk4 NEW
Collet recording sk40 Gebr. for lid Milling machine.
Pinole sk40 Gebr. for lid Milling Machine fp1
Y-Bellows for lid fp4nc (2810) Milling Machine
Combi-spike hsk63a d22 a160mm
NEW LISTING Connection Cable Heidenhain Scale MS Mint 9p 5m
4 machine feet m20x150 NEW MILLING MACHINE/LATHE
X-Bellows fp2 (x 400 mm) for lid Milling Machine
Drill Chuck mk4 b16 d0, 3-13
Collet Chuck 69871 oz467 with 4 Tongs Lids Milling Machine
Multifix Rotary Steel Holder b32/140 NEW for lathes
Collet Chuck sk40 din2080 er16 Set RL. Max 8μm e.g. F. Deckel Milling Machine
Y-Bellows 2001-686 NEW for lid fp2, fp3, FP 3l Milling Machine
Collet Chuck sk30 DIN 2080 er25 Set
3 kegelreduzierh徂lsen sk40 s20x2 mk1, 2,3 e.g. for Deckel Milling Machine
3 kegelreduzierh徂lsen sk40 s20x2 mk2, 3,4 e.g. for Deckel Milling Machine
Connection Cable Heidenhain Scale 8m NEW 9p. on St.
Connection cable id. No. 309777-08 for Heidenhain Encoder
Collet Chuck sk30 DIN 2080 with er20 Collet Set RL. Max 8μm
Multifix abstechhalter AAT NEW for Lathe
Extension CABLE Heidenhain id.nr.335074-15 15m
Connection cable id. No. 284136-01 for Heidenhain Scale
Connection cable id. No. 289108-06 for Heidenhain Scale
Short Drill Chuck mk2 m10 d1-8 eg for Deckel Milling Machine
Collet Chuck D 3mm NEW for Cover g1u or g1l
Collet set oz 462e NEW e.g. F. Deckel Milling Machine
Collet Chuck d4 NEW for Cover g1u or g1l
Collet Chuck d6 NEW for Cover g1u or g1l
Extension CABLE Heidenhain Scale Gebr. 9p. 8m d8
Extension CABLE Heidenhain Scale SubD 15 15m id.nr.335074-15
Collet Chuck d1/16 inch New For Lid g1u or g1l
Y-Scrapers 2807-1216 for lid Milling Machine fp4cc and fp5-80
Collet Chuck d2mm NEW for Cover g1u or g1l
Collet Chuck d5mm NEW for Cover g1u or g1l
Connection cable id. No. 310135-04 for Heidenhain Scale
Collet Chuck d1/4 inch New For Lid g1u or g1l
Collet Chuck d1/8 inch New For Lid g1u or g1l
Collet Chuck d3/16 inch New For Lid g1u or g1l
3 Combi Clip - on Mandrel sk40 d16, d22, 27 din69871 e.g for Deckel Milling Mach...
3 Combi Clip - on Mandrel sk40 d22, d27, 32 din69871 e.g. for Deckel Milling Mac...
Collet Chuck d6 NEW for lid gk21
Collet Chuck d3 NEW for lid gk21
Collet Chuck 1/4 "New for lid gk21
Collet Chuck d5 NEW for lid gk21
Collet Chuck d2 NEW for lid gk21
Collet Chuck 5/16 "New for lid gk21
Collet Chuck 1/8 "New for lid gk21
Collet Chuck d4 NEW for lid gk21
Collet Chuck d2, 5 NEW for lid gk21
Connection Cable ID No 310130-03 Heidenhain Scale NEW 9p. for ls106 3m
Chuck sk45 for centricator C III
Connection cable id. No. 310126-03 for Heidenhain Scale
Collet Chuck d1, 5 NEW for lid gk21
Collet Chuck d3/16 "New for lid gk21
Multifix abstechhalter AAT NEW for Lathe
Collet Chuck d8 NEW for lid gk21
Swing Arm for Heidenhain VRZ counters.
Multifix Rotary Steel Holder c32/170 for Lathe
Collet set oz 462e NEW e.g. for Deckel Milling Machine
Connection cable id. No. 298430-03 for Heidenhain Scale
Y-Scrapers 22060594 for Maho mh500
NEW LISTING X-axis Spindle Nut Gebr. fp2 to manufactured 1960 -1675 for lid Milling Machine
4 machine feet m20x100 NEW MILLING MACHINE/LATHE
4 kegelreduzierh徂lsen sk40 DIN 2080 Lid Milling Machine
Collet Chuck Cylindrical Mini er11 d16, l100 Set
Multifix Rotary Steel Holder b32/140 NEW for lathes
Connection cable id. No. 313791-03 for Heidenhain Scale
Multifix Rotary Steel Holder b25/120 NEW for lathes
Drill Chuck mk4 b16 d0-8
Combi Clip - on Mandrel hsk63a d32
Multifix Drilling Steel Holder EH - 25100 NEW for Lathe
Collet Set er25 d2-16mm RL. Max 8μm e.g. for Deckel Milling Machine
Connection Cable Heidenhain Scale 6m NEW 9p. on St.
Connection cable id. No. 310135-03 for Heidenhain Scale
Y-Axis Spindle Nut fp1 to manufactured CA 1942 for lid Milling Machine
Test Mandrel mk3 NEW
Connection cable id. No. 310126-01 for Heidenhain Scale
Multifix Rotary Steel Holder c32/150 for Lathe
Y-Bellows for macmon m100 Milling Machine
Multifix Rotary Steel Holder b32/120 NEW for lathes
豫公網安備41010502000017號 
