美孚SHC Aware H46液壓油_惠州市祥潤通化工科技有限公司

品牌：美孚	規格：18.9L/208L	材質：優
產地：美國太倉

Mobil SHC Aware H Series
美國環保署普通許可證標準的液壓油
產品描述
包裝規格：18.9L\208L
Mobil SHC Aware H係列潤滑油是，抗磨液壓油現代高壓液壓係統，滿足美國環境保護署（EPA）2013支普通許可證（VGP）“環保潤滑劑指南”。他們提供優良的寬溫度範圍內的性能超出非合成環保油的能力。
Mobil SHC Aware H係列潤滑油是專門制定到H酯基礎油和提供的抗磨強度特性的液壓係統的高負荷、高壓力下運行的必要和機械。
特點和優點
●符合美國EPA 2013支普通許可證要求環保的潤滑劑
●傑出的承載能力和抗磨性能，保護係統元件的抗磨損和劃傷和幫助提供長設備壽命
●剪切穩定的粘度指數高，有助於維持保護組件在很寬的溫度
●優異的熱氧化穩定性，有助於係統清潔度和減少維修停機時間和成本，使石油和過濾器壽命長
●優良的抗乳化性能保證除水下水線應用自如
●良好的彈性體的相容性，它具有相同的彈性體與常規礦物液壓油

應用程序
●海洋可調螺距螺旋槳(CPP)係統中,穩定劑,甲板設備、液壓係統泄漏或泄漏可能導致對環境不利的影響
●在係統容易生物降解,可能需要低限度的有毒液體
●循環係統包含齒輪和軸承,溫和耐特高壓特徵
●係統包含伺服閥
●液壓係統操作與油的溫度在-30攝氏度到+100攝氏度的範圍
●在環境敏感地區海洋和移動設備的操作
●輕度至中度服務條件下循環係統操作
●工業液壓係統泄漏或溢出的液體可以進入工廠廢水
●空氣管路加油工和一些有限的油霧生成係統

Mobil SHC Aware H46
U.S. EPA 2013 Vessel General Permit Compliant Hydraulic Oil
Product Description
Mobil SHC Aware? H Series lubricants are high performance, anti-wear hydraulic oils for modern high pressure hydraulic systems that meet the U.S. Environmental Protection Agency (EPA) 2013 Vessel General Permit (VGP) guidelines for “environmentally acceptable lubricants”. They provide excellent wide temperature range performance above and beyond the capabilities of non-synthetic environmentally acceptable oils. Mobil SHC Aware H Series oils are specially formulated from ester base stocks and provide exceptional anti-wear and film strength characteristics necessary for hydraulic systems operating under high load and high pressures.

Features and Benefits
Meets US EPA 2013 Vessel General Permit requirements for environmentally acceptable lubricants
Outstanding load-carrying and anti-wear properties which protects system components against wear and scuffing and helps provide long equipment life
Shear stable high viscosity index help sustain component protection over a wide temperature
Excellent thermal /oxidation stability that can help reduce maintenance downtime and costs by contributing to system cleanliness and deposit reduction, enable long oil and filter life
Excellent demulsibility ensures ease of water removal in below waterline applications
Good elastomer compatibility, it works well with same elastomers used with conventional mineral hydraulic oils

Applications
Marine controllable pitch propellers (CPP) systems, fin stabilizers, deck equipment, hydraulic systems where spills or leakage could result in adverse environment impact
In systems where readily biodegradable and minimally toxic fluids may be required
Circulation systems containing gears and bearings where mild extreme-pressure characteristics are desired
Systems containing servo-valves
Hydraulic systems operating with oil temperatures in the range of -30C to +100C
Marine and mobile equipment operating in environmentally sensitive areas
Circulation systems operating under mild to moderate service conditions
Industrial hydraulic systems where leaked or spilled fluids could get into plant effluent
Air line oilers and some limited oil-mist generating systems

Specifications and Approvals
Mobil SHC Aware H Series meets or exceeds the following regulatory requirements:324668
?
US EPA 2013 Vessel General Permit X X X

Typical Properties
Mobil SHC Aware H Series
?
ISO Viscosity Grade 32 46 68
Viscosity, ASTM D 445
cSt @ 40 ?C 32 46 68
cSt @ 100 ?C 6.00 8.20 10.37
Viscosity Index, ASTM D 2270 140 140 140
Density @ 15 ?C, ASTM D4052, g/ml 0.912 0.905 0.915
FZG Gear Test, A/8.3/90, DIN ISO 14635-1, Fail Load Stage 11 12 >12
Rust Characteristics, procedure B, ASTM D 665 Pass Pass Pass
Pour Point, ASTM D 97, ?C -30 -30 -30
Flash Point, (min) ASTM D 92, ?C 185 185 185
Biodegradability, CO2 Evolution, OECD 301 B, % >60 >60 >60
Acute Algal Toxicity 72h EC^₅₀, OECD 201, mg/l >1000 >1000 >1000
Acute Daphnia Toxicity 48h EC^₅₀, OECD 202, mg/l >1000 >1000 >1000
Acute Fish Toxicity 96h LC^₅₀, OECD 203, mg/l >1000 >1000 >1000
Bioaccumulation, OECD 117,
Partition Coefficient, log KOW <3 <3 <3
深圳市旺潤達商貿有限公司本公司代理品牌工業潤滑油。旺潤達批發供應殼牌(SHell)、加德士(CALTEX)、美孚(Mobil)、埃索(Esso)、BP、嘉實多(Casrtol)等工業潤滑油及船舶潤滑油。!一個電話，給您一個驚喜。電話訂貨成功，公司承諾免運費,電話: 0755-29032325 傳真：0755-29032326
QQ:374799869 聯係人：李小姐手機： 18118757667

?
ISO Viscosity Grade	32	46	68
Viscosity, ASTM D 445
cSt @ 40 ?C	32	46	68
cSt @ 100 ?C	6.00	8.20	10.37
Viscosity Index, ASTM D 2270	140	140	140
Density @ 15 ?C, ASTM D4052, g/ml	0.912	0.905	0.915
FZG Gear Test, A/8.3/90, DIN ISO 14635-1, Fail Load Stage	11	12	>12
Rust Characteristics, procedure B, ASTM D 665	Pass	Pass	Pass
Pour Point, ASTM D 97, ?C	-30	-30	-30
Flash Point, (min) ASTM D 92, ?C	185	185	185
Biodegradability, CO2 Evolution, OECD 301 B, %	>60	>60	>60
Acute Algal Toxicity 72h EC^₅₀, OECD 201, mg/l	>1000	>1000	>1000
Acute Daphnia Toxicity 48h EC^₅₀, OECD 202, mg/l	>1000	>1000	>1000
Acute Fish Toxicity 96h LC^₅₀, OECD 203, mg/l	>1000	>1000	>1000
Bioaccumulation, OECD 117, Partition Coefficient, log KOW	<3	<3	<3