LOCTITE CR3510/ LOCTITECR4300
LOCTITE CR 3510 / LOCTITE CR 4300 provides the following product characteristics:
TLOCTITE CR 3510 / LOCTITE CR 4300 is a solven
PreliminaryStatement: Prior to use it is necessary to read the Material Safety Data Sheet for information about precautionary measures and safety recommendations. Also, for chemical products exempt from compulsory labeling, the relevant precautions should always be observed. Please also refer to the local safety instructionsandcontactHenkelforanalytical support. Pretreatment: The substrate should be clean, dry, free of dust, oil, grease and other contaiminants. The usage of suitable primers on metal surfaces can improve the adhesion and / or the long-term bond stability. The surface of plastic materials should be cleaned, so as to remove any kind of release agents present on the substrate surface. An improvement of the adhesioncan be achieved by grinding or sandblasting the surface.
Macroplast? UK 145A/B
Macroplast? UK 178A/B
Macroplast? UK 231A/B
Macroplast? CR 3528/4200
Macroplast? CR 3510/4300
Macroplast? CR 3519/4200
Macroplast? CR 3525/4200
Macroplast? EP 3030/5030
Macroplast? EP 3299/5299
Macroplast? EP 3640/5640
Technomelt? Q 4208
Macroplast? CR 3519/4300