Vacmul EDM fluids are multipurpose dielectric fluids for use in all discharge machines working by penetration especially for roughing, finishing and superfinishing work. Vacmul EDM is very pure fluid designed for maximum machine productivity and operator comfort when used in electrical-discharge machining, also called spark-erosion machining. In this metalworking process metal is removed from a workpiece by applying a potential difference between the workpiece and a shaped electrode. Vacmul EDM has the ability to provide uniform insulation and then to permit controlled electrical discharge at the breakdown voltage.
Vacmul EDM has the correct balance of viscosity, volatility, oxidation stability, heat transfer characteristics, low odour and low toxicity. Vacmul EDM is a highly refined, narrow-cut, low viscosity fluid specially suited to finishing operations where a high quality finish is required. It functions as an insulator between tool and workpiece, spark conductor, coolant and as a flushing oil for chip removal. Vacmul EDM is recommended for roughing operations where a high metal removal rate is required and for finishing and superfinishing work.
FeaturesAdvantages and Potential Benefits
| High flash point | Limits fire risk |
| Excellent filterability through cartridge and earth | Increased production |
| High wetability | Ensures liquid / metal contact and fewer rejects |
| Bright, clean and odourless. | Easy viewing of work piece and fixtures |
| Low skin sensitivity in normal use | Easy handling and improved workshop environment |
| Non fatty compared to more viscous fluids. | Higher metal removal rate and stable electrical discharge |
| Good detergency with respect to small particles. | Provides uniform insulation, higher precision and surface finish |
Excellent for all electro discharge machines that work by penetration.
Especially suitable for roughing, finishing and superfinishing work.
Vacmul EDM23
| Density @ 15°C, kg/l ASTM D1298 | 0.791 | 0.799 |
| Colour, Saybolt | +30 | +30 |
| Viscosity cSt at 40°C mm2/s ASTM D445 | 1.61 | 2.37 |
| Flash Point, (P.M.) °C | 83 | 108 |
| IBP °C | 207 | 243 |
| FBP °C | 227 | 272 |
| Appearance | Clean and Bright | Clear and Bright |
Based on available information, this product is not expected to produce adverse effects on health when used for the intended application and the recommendations provided in the Material Safety Data Sheet (MSDS) are followed. MSDS's are available upon request through your sales contract office, or via the Internet. This product should not be used for purposes other than its intended use. If disposing of used product, take care to protect the environment.
包 裝：18L/208L 桶
| 品牌 | 美孚潤滑油 | 殼牌潤滑油 | 嘉實多、BP | 福斯潤滑油 | 克魯勃潤滑油 |
| 1 | 液壓油 | 液壓油 | 液壓油 | 齒輪油 | 齒輪油 |
| 2 | 齒輪油 | 齒輪油 | 齒輪油 | 切削油 | 潤滑脂 |
| 3 | 潤滑脂 | 潤滑脂 | 切削液 | 潤滑脂 | 鏈條油 |
豫公網安備41010502000017號 
