gleitmo SFL 9065 (Item No. 5365) Heat curing PTFE solid film lubricant based on water
Description gleitmo SFL 9065 is a seleced combination of solid lubricants and organic binder in water. After hardening gleitmo SFL 9065 forms an adhesive, oil and solvent resistant solid fil lubricant featuring a low coefficient of friction, high wear resistance and a good corrosion protection. Fields of application gleitmo SFL 9065 serves as lifetime lubrication of components wher high requirements have to be met in terms of wear resistance combined with a good corrosion protection. Furthermore gleitmo SFL 9065 can be used to coat mass parts (pins, screws/bolts, etc.) and thermally stable plastics. Method of application Degrease the components thoroughly prior to coating. gleitmo SFL 9065 was designed for spray coating. gleitmo SFL 9065 is suitable for application using electrostatic spray application methods. It can however also be applied by dip spinning and/or drum coating equipment. To increase its adhesion and thus the life of gleitmo SFL 9065 it is recommended to pre-treat metallic materials by phosphating or sand blasting. Note Stir gleitmo SFL 9065 well before use. Protect from freezing. Shelf life: 12 months in original containers at ambient temperature. Features temperature range: -180 / +250 °C supports oil or grease lubrication suitable for lifetime lubrication good corrosion protection forms a fast-drying, adhesive lubricating film resistant to solvents, mineral oil, and synthetic fluids resistant to pressure and abrasion