磁力研磨機_深圳市順佳研磨科技有限公司

品牌：順佳	規格：SJ-660	材質：不銹鋼
產地：東莞

利用神奇磁場力量傳導不銹鋼針磨材產生加速旋轉動作，率達到精密研磨去除毛邊和拋光洗凈效果

With the use of the magical force of magnetic field, making the stainless steel pins rotate very fast, to de-burr, polish and clean the workpieces high-effectively and precisely.

1、特點Features

1) 快速去除毛邊能力，細小內孔、內管、夾縫死角均可研磨，絕不變形及傷表面，不影響精度。

Have excellent ability of fast de-burring, high efficiently grinding small inner holes, inner pipes, crevices, etc. Make NO damage to the surface of workpieces, and DO NOT affect the accuracy of workpieces.

2) 加工速度快，一次3~15分鐘即可完成，可在機器運轉中替換工件。

Fast grinding or polishing, only 3~15 minutes is needed for each time.

Workpieces can be changed during the machine running.

3) 操作方面簡單，成本低，，不銹鋼針為性磨材。

Simple and convenient operation, low cost, no pollution. The stainless steel pins are permanent abrasives.

2、用途Application

金飾業打磨洗凈工作，成品表面拋光處理，去除氧化薄膜工作，銹蝕去除處理，電鍍或噴漆前處理，燒結痕跡處理，零件殘磁去除。

Use in metal industry for Gringding, cleaning, polishing surface of workpiece, removing layer of oxide on the workpiece, derusting, processing before plating or painting, processing the marks of sintering, and demagnetizing the workpiece.

3、說明Description

1)研磨速度快，平均一次研磨時間約3~15分鐘，替換工件快，可在機器運轉過程中替換零件。

Grinding quickly, it only takes 3~15 minutes for each time on average.

Easy and fast changing the workpieces, the workpieces can be changed during the machine running.

2)操作簡單，，完全免技術，一人可操作多臺機器。

Simple operation, absolute safety. One person can operate multiple machines.

3)成本低，不銹鋼針為性磨材，消耗極低，的耗材為研磨液。，研磨液含95%水分，故無毒性及發生火災之慮。

Low cost, the stainless steel pins are permanent abrasives. The only consumable item is Grinding (Brightening) Fluid. No pollution. The grinding (brightening) fluid contains 95% moisture, and is non-toxic; you can have no worry about fire on it.

4)研磨完成後，工件好處理，可用篩網、篩桶或磁鐵，輕易將工件和不銹鋼針分開。

The workpieces can be easily dealt with after grinding. Can use a sieve mesh, sieve drum or magnet to easily separate the workpieces from the pins

4、安裝環境Installing Environment

1)無水滴、蒸汽、灰塵及油性灰塵之場所。

Place WITHOUTwater drops, vapor, dust or oily dust.

2)無腐蝕、易燃性之氣體、液體。

Place WITHOUT corrosive, flammable liquid or gas.

3)無漂浮性的塵埃及金屬微粒。

Place WITHOUT floating dirt and metal particle.

4)緊固無振動之場所。

Place of no vibration.

5、操作順序

1)將機器連接在有可靠接地的標準電源中。各型號對電源要求如下：

型號	電源要求
SJ-660	3相380V，50/60HZ，13A
SJ-650	3相380V，50/60HZ，13A
SJ-645	單相220V，50/60HZ，13A
SJ-635	單相220V，50/60HZ，13A
SJ-628	單相220V，50/60HZ，13A

Connect the machine to the standard power supply with reliable ground lead. The power supply for each model is as below.

MODEL	POWER SUPPLY
SJ-660	3 Phase 380V，50/60HZ，13A
SJ-650	3 Phase 380V，50/60HZ，13A
SJ-645	Single Phase 220V，50/60HZ，13A
SJ-635	Single Phase 220V，50/60HZ，13A
SJ-628	Single Phase 220V，50/60HZ，13A

2)將放有適量工件及研磨材料之塑料質容器放在研磨槽中間位置，開啟電源(ON)，設定總研磨時間TOTAL TIMER(H小時.M分。S秒)及正反轉時間REV/FWD TIMER、設置工作速度SPEED SET(0-10V模擬速度)，9V等於1400轉左右。

Put the plastic grinding container (e.g.a tub) with proper amount of workpieces and abrasives in the middle of the grinding trough, turn on the power and set the total time (Hour. Minutes. Second), the REV/FWD time, and the working speed (0~10V, 9V=1400 r/min).

3)啟動運行按鈕START，機器開始工作。

Press the “START” Key, and the machine starts working.

4)工作在設定時間完成後，應再次啟動機器，拿走研磨桶進行清洗，然後按STOP按鈕停止工作。(原因是工件在機器磁場運轉中才能剩磁)

After work finishing, should start again the machine and take away the grinding tub from the trough to clean the workpieces, and then stop the machine. (As the workpieces can only be demagnetized during the machine running.)

5)用分選篩將不銹鋼針分選後，放回桶內以便下次使用。

Separate the stainless steel pins with a sieve. The pins can be used again.

6、使用方法Method of Usage

1)使用塑料質容器，以免損壞工件。

Use a plastic container, (e.g. a plastic tub.) to avoid damaging the workpieces.

2)放入適量的不銹鋼針，研磨液，水和工件進行研磨或者拋光。

以下數據供參考：

型號	每次研磨時需用的不銹鋼針、研磨液、水和工件的分量	速度設定 (僅供參考)
SJ-660	鋼針Φ0.4以下的約1000克，若Φ0.5以上的鋼針要用約2000克；研磨液60毫升；水6公斤；工件：非導磁材料6~10千克，導磁材料1－4千克。	9V (約1400r/min)
SJ-650	鋼針1500~2000克；研磨液40~60毫升；水5~6公斤；工件：非導磁材料5~8千克，導磁材料1-2.5千克。	9V (約1400r/min)
SJ-645	鋼針約1200克，研磨液20~40毫升；水3~5公斤；工件非導磁材料3~6千克，導磁材料1-2千克。	9V (約1400r/min)
SJ-635	鋼針約700克；研磨液20~40毫升；水2~4公斤；工件：非導磁材料1~3千克，導磁材料1千克。	9V (約1400r/min)
	＊研磨工件時導磁材料分量為非導磁材料分量的1/3。工件超分量研磨，機器如有損壞本公司概不負責。

Put appropriate amount of stainless steel pins, grinding fluid, water and workpieces into the tub to grind or polish. The following amount is for reference.

MODLE	The amount of pins, grinding fluid, water and workpieces to be used each time	Speed Setting (Only for reference)
SJ-660	Pins Φ 0.4, use about 1000 grams, if the pins Φ 0.5, use about 2000 grams; grinding fluid 60ml, water 6 kg, workpieces non-magnetic material 6~10 kg.,magnetic materials 1-4kg	9V (about 1400r/min)
SJ-650	Pins 1500~2000 grams; grinding fluid 40~60ml, water 5~6 kg, workpieces non-magnetic material 5~8 kg.,magnetic materials 1-2.5kg	9V (about 1400r/min)
SJ-645	Pins 1200 grams; grinding fluid 20~40ml, water 3~5 kg, workpieces non-magnetic material 3~6 kg.,magnetic materials 1-2kg	9V (about 1400r/min)
SJ-635	Pins 700 grams; grinding fluid 20~40ml, water 2~4 kg, workpieces non-magnetic material 1~3 kg.,magnetic materials 1kg	9V (about 1400r/min)

7、研磨用不銹鋼針選擇Choice of grinding stainless pins

1）針愈粗研磨能力愈強，故選擇針時以工件材質軟硬為依據。不銹鋼或鐵類可選擇直徑0.5mm以上針，銅鋁等其材質較軟材料可選擇直徑0.5mm以下較適宜。當然磁力研磨機的磁力大小可無段調整，因此經測試多次後，即可選定適當的磨材。

The bigger the pins are, the better the grinding ability is. Thus, choose the pins should depend on the softness or hardness of the workpiece material. Can choose pins with diameter over 0.5mm for Stainless steel or Iron workpieces, and pins blow 0.5mm for softer material workpieces such as copper or aluminium.

Of cause the magnetic force of the machine is adjustable, thus can test for more times to get a suitable grinding pins.

2）要研磨工件的孔徑大小，決定針的及長短，另如要研磨工件的孔內夾縫時，建議使用3mm長的針，效果較好。

The holes of the workpieces decide the big or small, long or short pins to be used. If the cracks into the holes are to be grinded, the 3mm long pin is suggested to be used for better effect.

3)不銹鋼針磨材為性材料，可連續使用。

The stainless steel pins are permanent grinding materials, can be used for many times.

8、研磨液功用Function of Grinding Fluid

1)防銹、拋光、冷卻、清洗、除油等功能。

Rust-prevent, polishing, cooling, cleaning and oil removing etc.

2)研磨液連續研磨約30分鐘、溫度可達70℃，請注意輪流交換。

The grinding fluid grinds for 30 minutes, its temperature can be 70℃, please change with cool one.

3)如工件表面含油太多，需先清洗除油再研磨。

If the surface of workpieces too oily, the oil should be removed first before grinding.

9、注意事項NOTES

1)電源有可靠接地

The power supply must have a reliable ground lead.

2)變頻調試器功能鍵不可隨意修改(以出廠時設置為準)

The function key of the frequency conversion adjuster should not be changed at will. (Factory setting is standard.)

3)研磨完成後，研磨工件在機器運轉中拿走清洗(以免工件被磁化)

After grinding finishes, workpieces should be taken away during the machine running, so that the workpieces are not magnetized.

4)使用塑料質研磨桶，以免損壞工件

To avoid damaging the workpieces, should use a PLASTIC container for grinding.

5)研磨槽內不可進水，以免損壞機器。

To avoid damaging the machine, the grinding trough should not be watered.

10、機器保養Maintenance of Machines

1)每班清理研磨槽內掉下的鋼針和水。

Clean the grinding trough per shift.

2)研磨槽內的膠墊每班使用前要清理鋼針再使用。

Clean the rubber mat on the grinding trough before grinding.

3)研磨槽內排水管要保持暢通。

Keep unblocked to the drain pipe of the grinding trough.

4)機器表面要保持清潔、幹爽。

Keep the surface of the machine clean and dry.

5)機器後面及底下風扇過濾網每30天要清理一次。

Clean the strainers to the fans on the back and bottom of the machine every 30 days.