BENTLY140113-02連接器保護套件_廈門阿米控技術有限公司

BENTLY NEVADA 140113-02 連接器保護套件

產品詳情資料：

本特利990單通道軸振動變送器用於機器軸振動監測，如離心式空氣壓縮機、風機、小型水泵、電機等機組，將振動信號按照比例變送成4至20mA信號，提供給設備的控制係統PLC或DCS。本特利990振動變送器是雙線回路供電的設備，可接受bently3300 XL NSv接近探頭的輸入信號及其匹配的延長電纜（有5米和7米的係統長度可供選擇）。變送器可將信號調整為相應的振動峰值單位，並將此值按比例變成4 至 20mA 的工業標準輸入信號提供給控制係統1，以便機組的保護、報警和邏輯控制。

與3300 NSv 接近探頭兼容，傳感器可安裝在下間隙、典型式的離心式空氣壓縮機狹小區域中。

輸入：接受1個非接觸式的3300 NSv接近探頭和延長電纜。

電源：變送器終端需要 +12 至 +35 Vdc 的輸入。

輸出：規定的全量程範圍內兩線制的4 至 20 mAdc

準確性：在±1.5% 規定的全量程範圍內

線性範圍：0.5至1.75 mm (20 至 55 mil)

靈敏度：7.87 mV/μm (200 mV/mil) ± 6.5%

危險區域認證：CSA/NRTL/C、ATEX

訂購信息990-AXX-BXX-CXX-DXX

A:滿量程選項

04 0-4 mils pp (0-100 μm pp)

05 0-5 mils pp (0-125 μm pp)

0* 若訂購大量程如0-200μm pp，請聯係本公司

B:係統長度選項

50 5.0 米 (16.4 英尺)

70 7.0 米 (23英尺)

C:固定選項

01 35 mm DIN導軌壓板

02 隔板固定螺釘

03 DIN 導軌壓板和螺釘

D:防爆場所機構認證選項

00 不需要

01 CSA Division 2

05 CSA，ATEX包括ABS海事認證

CN 中國儀器儀表部門認證

產品英文詳情資料：

The Bentley 990 single channel shaft vibration transmitter is used for monitoring machine shaft vibration, such as centrifugal air compressors, fans, small water pumps, motors, and other units. The vibration signal is proportionally transmitted into 4 to 20mA signals and provided to the control system PLC or DCS of the equipment. The Bently 990 vibration transmitter is a dual wire loop powered device that can accept input signals from the bently3300 XL NSv proximity probe and its matching extension cable (available in system lengths of 5 and 7 meters). The transmitter can adjust the signal to the corresponding vibration peak unit and proportionally convert this value into an industrial standard input signal of 4 to 20mA, providing it to control system 1 for unit protection, alarm, and logic control.

Compatible with the 3300 NSv proximity probe, the sensor can be installed in narrow areas of typical centrifugal air compressors with lower clearances.

Input: Accepts 1 non-contact 3300 NSv proximity probe and extension cable.

Power supply: The transmitter terminal requires an input of+12 to+35 Vdc.

Output: 4 to 20 mAdc in a two wire system within the specified full range

Accuracy: Within ± 1.5% of the specified full range range range

Linear range: 0.5 to 1.75 mm (20 to 55 mils)

Sensitivity: 7.87 mV/ μ m (200 mV/mil) ± 6.5%

Hazardous Area Certification: CSA/NRTL/C, ATEX

Ordering Information 990-AAXX-BXX-CXX-DXX

A: Full Scale Option

04 0-4 mils pp (0-100 μ m pp)

05 0-5 mils pp (0-125 μ m pp)

If you order a large quantity, such as 0-200 μ M pp, please contact our company

B: System length options

50 5.0 meters (16.4 feet)

70 7.0 meters (23 feet)

C: Fixed options

01 35 mm DIN rail pressure plate

02 Partition plate fixing screws

03 DIN rail pressure plate and screws

D: Explosion proof site agency certification options

00 No need

01 CSA Division 2

05 CSA, ATEX including ABS maritime certification

CN China Instrument and Meter Department Certification

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用於識別目的，並不表示與任何權利持有人有任何關聯或授權。

Honeywell	MC-IOLX02 51304419-150	GE	IS200EPCTG1A
HONEYWELL	FC-USI-0002	GE	IS200ECTBG2A
HONEYWELL	FC-TSHART-1620M	GE	IC755CSW07CDA
HONEYWELL	FC-TSAI-1620M	GE	IC755CSW07CDA
HONEYWELL	FC-TPSU-2430	GE	IC755CSS15CDA
HONEYWELL	FC-SDO-0824 V1.3	GE	IC755CSS12CDB
HONEYWELL	FC-SDO-0824	GE	IC754VSI12CTD-KJ
HONEYWELL	FC-SDI-1624 V1.1 SDI-1624	GE	IC754VSI12CTD
HONEYWELL	FC-SDI-1624	GE	IC754CSL06MTD
HONEYWELL	FC-SAI-1620M	GE	IC752SPL013