3500/45-01-00機械量儀配件_廈門阿米控技術有限公司

產品標題: 3500/45-01-00機械量儀配件

型號： 3500/45-01-00

品牌： 本特利

產品詳情資料：

3500/45脹差監測器是一個四通道監測器，它從渦流傳感器接收輸入信號，並用該信號驅動報警。利用3500框架組態軟件為3500/45編程，可以執行以下任何一種功能:脹差、補償式輸入脹差、機殼膨脹（CH3、CH4）。3500/45監測器使用位移輸入/輸出模塊，該模塊能接收來自以下本特利傳感器的輸入信號。

渦流傳感器：25、35和50mm擴展範圍傳感器及LVDT。

3500/45監測器的基本作用是提供1)機械保護，通過連續不斷地比較當時的轉子位移與報警設置點來驅動報警2)將重要的轉子位移信息給操作人員和維修人員。報警設置點可用3500框架組態軟件來設置。可為每個有效成比例值設置報警設置點，也可根據監測器類型為每一個或兩個有效成比例值設置危險設置點。

當遠離廠家時，3500/45是以未組態過的形式交貨的。當需要時，3500/45可以被安裝進3500框架，進行組態以執行所要求的監測功能。

3500/45 差脹/軸向位置監測器是一個可接收趨近式渦流傳感器、旋轉位置傳感器(RPT)、DC 線性可變微分變換器(DCLVDT)、AC 線性可變微分變換器(AC LVDT)和旋轉電位計輸入信號的4 通道監測器。

3500 框架組態軟件，3500/45 可被編程去完成如下功能：

軸向（側向）位置 ;

差脹 ;

標準單斜面差脹 ;

非標準單斜面差脹 ;

雙斜面差脹 ;

補償式差脹 ;

殼脹 ;

閥門位置

監測器通道成對編程，每次多能完成上述的兩個功能。通道1 和2 能完成一個功能，而通道3 和4 能實現另外一個(或同一個)功能。但是，只有通道3 和4 能實現殼脹監測。

產品英文詳情資料：

The 3500/45 differential expansion monitor is a four channel monitor that receives input signals from eddy current sensors and uses this signal to drive alarms. Using the 3500 Rack Configuration Software to program 3500/45, it is possible to perform any of the following functions: differential expansion, compensated input differential expansion, and casing expansion (CH3, CH4 only). The 3500/45 monitor uses a displacement input/output module that can receive input signals from the following Bentley sensors.

Eddy current sensors: 25, 35, and 50mm extended range sensors and LVDT.

The basic function of the 3500/45 monitor is to provide 1) mechanical protection, which drives alarms by continuously comparing the rotor displacement with the alarm set point at that time. 2) Provide important rotor displacement information to operators and maintenance personnel. Alarm setpoints can be set using the 3500 rack configuration software. Alarm setpoints can be set for each valid proportional value, or danger setpoints can be set for each or both valid proportional values based on the monitor type.

When away from the manufacturer, the 3500/45 is delivered in an unconfigured form. When needed, the 3500/45 can be installed into the 3500 rack for configuration to perform the required monitoring functions.

The 3500/45 differential expansion/axial position monitor is a 4-channel monitor that can receive input signals from approaching eddy current sensors, rotating position sensors (RPT), DC linear variable differential converters (DCLVDT), AC linear variable differential converters (AC LVDT), and rotating potentiometers.

3500 Rack Configuration Software, 3500/45 can be programmed to perform the following functions:

Axial (lateral) position;

Differential expansion;

Standard single slope differential expansion;

Non standard single slope differential expansion;

Double slope differential expansion;

Compensated differential expansion;

Shell expansion;

Valve position

Monitor channels are programmed in pairs, capable of completing up to two functions at a time. Channels 1 and 2 can perform one function, while channels 3 and 4 can perform another (or the same) function. However, only channels 3 and 4 can achieve shell expansion monitoring.

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用於識別目的，並不表示與任何權利持有人有任何關聯或授權。

HONEYWELL	80366189-175	ABB	PP D539 A102 3BHE039770R0102
ABB	ITCTU11	ABB	3BHE031065R0020
HONEYWELL	51305482-175	ABB	PM867K01 3BSE076355R1
Yokogawa	EC401-50	SIEMENS	A5E42881731
BENTLY NEVADA	177230-02	ICS TRIPLEX	T8310
Siemens	6ES5955-3LF44	ICS TRIPLEX	T8461
BENTLY NEVADA	3300/20 135322-01	ABB	PP D512 3BHE040375R103E
BENTLY NEVADA	3500/50M 106M2686-01	ICS TRIPLEX	T8480
BENTLY NEVADA	3300/10 78422-01	ICS TRIPLEX	T8110C
BENTLY NEVADA	84140-01 78462-01	ABB	3BHE041626R0101 PD D405 A101