你好，歡迎來到世鋁網 [請登錄] [免費注冊]
世鋁網 鋁業產品
您當前的位置： 世鋁網 鋁業產品 鋁板 BENTLY 3500/53-01-00超速檢測 3

BENTLY 3500/53-01-00超速檢測

加入收藏 舉報
詳細信息

產品標題:  BENTLY 3500/53-01-00超速檢測模塊

型號： 3500/53-01-00

品牌： BENTLY


                                                                              產品詳情資料：


3500/53??超速檢測模塊?

本特利的3500?係列機械檢測係統的電子超速檢測係統是高度可靠、快速響應的冗餘轉速表係統，專門用於機械的超速保護。3500/53?模塊可用於組成2?選2?或3?選2(推薦)表決係統。安裝超速檢測係統的3500框架要求配備冗餘電源。?

每一個超速檢測模塊接收一個渦流傳感器或磁傳感器的信號，輸入信號的範圍是＋10.0V?至?-24.0V。信號超出此範圍，在模塊內受限。適用於本特利3300?8mm?渦流傳感器，3300?16mm?高溫渦流傳感器（HTPS），7200?5mm、8mm、11mm和14mm?渦流傳感器，3300?RAM渦流傳感器，或磁傳感器。?

本特利3500/53超速保護模塊，其設計是一個通道模塊，它適用於兩模塊或三模塊組的超速保護應用。模塊接收來自趨近式傳感器或磁電式傳感器的轉速脈衝輸入信號，並使用這個輸入信號驅動報警。為了實現機器保護目的，模塊提供四種快速響應報警繼電器輸出。3500超速保護係統組態成兩模塊二選一表塊或三模塊三選二表決設置。

3500超速保護係統的基本目的是提供1)通過連續比較當前機器轉速與組態的報警設置點去驅動報警來實現機器保護和2)提供重要的機器轉速信息給運行人員和維修人員。使用3500框架組態軟件設置報警設置點。

當從工廠發貨時，3500/53沒有組態。當需要時，為了實現所要求的監測功能，3500/53可安裝到3500框架並組態。

作為3500機器管理和保護係統的一部分，三通道3500/53超速保護係統可提供高可靠性超速保護。三通道超速保護係統包括3500框架，3500電源，框架接口模塊和三個獨立的超速保護模塊。要求三個獨立的傳感器輸入。3500/53模塊可安裝到框架接口模塊右邊的任何槽位(2-15)，但三個模塊組，相鄰安裝。每個3500框架中只能安裝一組超速保護係統。3500/53超速保護係統可安裝在具有其它3500監測功能的3500框架中。

三通道超速保護係統提供3個獨立的轉速監測通道。在報警時，三通道超速保護係統可組態成能提供3選2的表決功能。具有這種功能時，來自每個模塊的報警輸出進行比較，在繼電器被驅動前，兩個模塊一致。


133388-01  3500/53 超速檢測模塊

133396-01 超速檢測I/O 模塊

288062-01 3500/53M Overspeed Detection Module

323133-01 Overspeed Detection I/O Module

常用型號

3500/50-01-00-01(288062-02,133442-01)

3500/50-02-00-01

3500/50-03-00-01


                         產品英文詳情資料：


3500/53 Overspeed Detection Module

The electronic overspeed detection system of Bentley's 3500 series mechanical detection system is a highly reliable and fast response redundant Tachometer system, which is specially used for mechanical overspeed protection. The 3500/53 module can be used to form a 2 out of 2 or 3 out of 2 (recommended) voting system. The 3500 rack for installing an overspeed detection system requires redundant power supplies.


Each overspeed detection module receives a signal from an eddy current sensor or magnetic sensor, with an input signal range of+10.0V to -24.0V. The signal exceeds this range and is limited within the module. Suitable for Bentley 3300 8mm eddy current sensors, 3300 16mm high-temperature eddy current sensors (HTPS), 7200 5mm, 8mm, 11mm, and 14mm eddy current sensors, 3300 RAM eddy current sensors, or magnetic sensors.

Bentley 3500/53 overspeed protection module is designed as a channel module, which is applicable to overspeed protection applications of two module or three module groups. The module receives a speed pulse input signal from a proximity sensor or magnetoelectric sensor and uses this input signal to drive an alarm. In order to achieve machine protection purposes, the module provides four types of fast response alarm relay outputs. The 3500 overspeed protection system is configured as a two module two choice meter block or a three module two choice voting setting.


The basic purpose of the 3500 overspeed protection system is to provide 1) drive alarms by continuously comparing the current machine speed with configured alarm setpoints to achieve machine protection, and 2) provide important machine speed information to operators and maintenance personnel. Use the 3500 rack configuration software to set alarm setpoints.


When shipped from the factory, the 3500/53 is not configured. When needed, in order to achieve the required monitoring functions, the 3500/53 can be installed and configured into the 3500 rack.


As part of the 3500 machine management and protection system, the three channel 3500/53 overspeed protection system provides high reliability overspeed protection. The three channel overspeed protection system includes a 3500 rack, a 3500 power supply, a rack interface module, and three independent overspeed protection modules. Three independent sensor inputs are required. The 3500/53 module can be installed in any slot (2-15) on the right side of the frame interface module, but the three module groups must be installed adjacent. Only one set of overspeed protection systems can be installed in each 3500 rack. The 3500/53 overspeed protection system can be installed in a 3500 rack with other 3500 monitoring functions.

The three channel overspeed protection system provides three independent speed monitoring channels. When giving an alarm, the three channel overspeed protection system can be configured to provide a voting function of 2 out of 3. When equipped with this function, the alarm outputs from each module must be compared and the two modules must be consistent before the relay is driven.

133388-01 3500/53 Overspeed Detection Module

133396-01 Overspeed detection I/O module

288062-01 3500/53M Ove

323133-01超速檢測輸入/輸出模塊

常用型號

3500/50-01-00-01（288062-02133442-01）

3500/50-02-00-01

3500/50-03-00-01

免責聲明：

AMIKON我們銷售新產品和停產產品，獨立渠道購買此類特色產品。阿米控不是本網站特色產品的授權分銷商、經銷商或代表。本網站上使用的所有產品名稱/產品圖片、商標、品牌和徽標均為其各自所有者的財產。帶有這些名稱,圖片、商標、品牌和徽標的產品描述、描寫或銷售僅用於識別目的，並不表示與任何權利持有人有任何關聯或授權。



PP D539 A102 3BHE039770R0102ICS TRIPLEXT8110C
3BHE031065R0020Bently Nevada46000-01
PM867K01 3BSE076355R1Bently Nevada177230-02-01-05
A5E42881731ABBCI867AK01
T8310STAHL9440/15-01-11
T8461GE750-P1-G1-S1-HI-A20-R-E
PP D512 3BHE040375R103EABBCI527 3BSE019327R1
T8480ABBPP877 3BSE069272R2
T8110CICS TRIPLEXT3480
3BHE041626R0101 PD D405 A101Allen Bradley80026-518-01







聯係方式
廈門阿米控技術有限公司
查看全部產品 進入展廳
  • 聯係人： 吳工 女士
  • 電話： 0592-5085207
  • 手機： 18030175270
  • 地址： 福建省 廈門市 思明區湖濱南路388號國貿大廈32D單元
供應商其他供應信息
還沒找到合適的產品？
  • 01
  • 快速發布求購信息
  • 下一步
  • 03
  • 聯係cnal客服：
  • 致電： 0371-63388900
    馬上啟動您的快速採購通道！